Tools & Materials
SuperDrive 55 Autofeed Screw Gun Review
This autofeed screw gun from Grabber is intended to be used for drywall, fence building, and subfloors
This is a smooth, solidly constructed autofeed screw gun unit that takes 50 screws per load in a floppy-tape collation. During testing, the driver’s bit became stuck in the extended position after driving 150 screws, but the jam was easily cleared and did not recur. With a narrow (1-1/4 in. to 2 in.) range of fasteners, the SuperDrive 55 is intended to be used for drywall, fence building, and subfloors.
The kit as tested included the autofeed unit, a Grabber Rocker screw gun (basically a DeWalt 251), a 22-in. extension with side handle, and a carrying case.
Comments are closed.