An Improved Rafter Pattern
Learn an easy method for cutting rafters using a small pattern for accurate, efficient cuts.
I learned how to cut rafters by cutting a full-scale pattern, then tracing it onto every rafter. This method works, but this also means picking up twice as many rafters as you need to. An easier method is to make a small pattern that can be used for marking the cuts and as a saw guide for the end cuts. As shown in the drawing, I make the pattern out of scrap 3/4-in. plywood and a couple of short 1×2 fences for alignment. To cut rafters, start by lining up as many pieces of rafter stock as possible on top of a set of sawhorses. Line them up with the crowns facing away from you; these are the tops of the rafters. Extra-wide sawhorses can be helpful here.
—Tinsley Morrison, Torrington, CT
From Fine Homebuilding #193
RELATED STORIES
Got a Tip?
Do you have any great tips like this one? Share your methods, tricks, and jigs with other readers. Tag them @FineHomebuilding on social, email them to us at [email protected], or upload them to FineHomebuilding.com/reader-tips. We’ll pay for any we publish.
Fine Homebuilding Recommended Products
Fine Homebuilding receives a commission for items purchased through links on this site, including Amazon Associates and other affiliate advertising programs.
Ladder Stand Off
Flashing Boot Repair
Hook Blade Roofing Knife
View Comments
great tip,,,,thanks