The Ridgid 0F45150 is a twin-tank compressor with a tool capacity of six finish nailers, or two roofing nailers, or two framing nailers. It is oil lubricated and has 4.5-gal. tanks. Its air-volume capacity is 6.2 scfm (a more accurate measurement than cfm because it accounts for factors that affect air pressure) at 90 psi.
Fine Homebuilding Recommended Products
Fine Homebuilding receives a commission for items purchased through links on this site, including Amazon Associates and other affiliate advertising programs.
8067 All-Weather Flashing Tape
Available in 2- to 12-in. widths, this is a good general-purpose flashing tape that sticks well to most things. It features a two-piece release paper, water-shedding layers, and good UV resistance.
This heat gun is great for drying joint compound, primer and paint when patching drywall and plaster walls. Plus it can soften adhesive, get a very cold small engine to start, and shrink heat-shrink tubing.
Prescriptive codes don't address the connection at less common angles, so base the connection off more typical ones using bolts, structural screws, blocking, and steel tension ties.
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently
say that I expect to be a life-long subscriber." - M.K.
Get home building tips, offers, and expert advice in your inbox
This is a dialog window which overlays the main content of the page. The modal window is a 'site map' of the most critical areas of the site. Pressing the Escape (ESC) button will close the modal and bring you back to where you were on the page.
Comments are closed.