FinishPro 11 Pin Nailer
The Senco FinishPro 11 pin nailer can fire up to 2-in pins
Feaure The FinishPro 11 is the only model tested that could fire 2-in. pins. I had to set my compressor to its maximum (120 psi) when shooting the 2-in. pins, but it sank every pin every time. Also, although the stated minimum nail length is 1 in., I shot a few racks of 5/8-in. pins without any trouble.
Flaw My guess is that this nailer shares a body with one of Senco’s 18-ga. models because it is the largest of the group. It also had a distinctive hiss-pop sound when fired that made it much louder than any other tool.
Bottom Line This tool is a vast improvement over the FinishPro 10, which could handle only up to 1-in. pins. If you want to fire 2-in. pins but don’t want to spend upward of $300, this tool is worth considering.
Comments are closed.