FHB Logo Facebook LinkedIn Email Pinterest Twitter X Instagram Tiktok YouTube Plus Icon Close Icon Navigation Search Icon Navigation Search Icon Arrow Down Icon Video Guide Icon Article Guide Icon Modal Close Icon Guide Search Icon Skip to content
Subscribe
Log In
  • How-To
  • Design
  • Tools & Materials
  • Restoration
  • Videos
  • Blogs
  • Forum
  • Magazine
  • Members
  • FHB House
  • Podcast
Log In

Fine Homebuilding Project Guides

Bathroom Design

Guide Home
  • Design and Planning
  • Featured Bathroom Projects
  • Cabinets and Fixtures
  • See more on plumbing bathrooms in the Plumbing Project Guide
  • See more on tiling showers in the Tiling Project Guide
How-To

Adding a Bathroom Fan

A quiet fan, airtight ductwork, and a leak-free vent combine to clear moisture from the bathroom and the house.

By Mike Guertin Issue 157
  • X
  • facebook
  • linkedin
  • pinterest
  • email
  • add to favorites Log in or Sign up to save your favorite articles

Synopsis: A remodeling contractor offers a step-by-step guide to the installation of a bathroom fan, stressing the importance of preventing any moist air from leaking into the attic. A sidebar in the PDF below illustrates how to wire a high-tech switch that will keep the fan running for 20 minutes after you leave the room.


If you’re like me and enjoy a hot shower, the last thing you want in your bathroom is a fan that sounds like a helicopter. The reality is that hot showers create moisture that, left alone, will lead to mold and mildew problems. Lucky for us, the bathroom fan has come of age.

Today’s fans are quieter and move more air than yesterday’s models. Whether I’m building a new house or remodeling a bathroom, I install an ultra-quiet exhaust fan because a quiet fan is more likely to be used. And a properly installed fan clears excess moisture from the bathroom and the house to where it is unable to find a way back in. The fan should be near the shower, and the ductwork should be airtight and vented out the roof or a gable-end wall. Vapor exhausted through a soffit often will be drawn back into the attic through the soffit vents. The entire system must be airtight to keep moisture from leaking into the attic or wall and ceiling cavities.

Once installed, the fan must be used properly. As long as moisture is in the bathroom, the fan should continue to run. To eliminate the risk of it being left on for hours at a time, I install a delay-timer switch with the fan, which keeps it running for up to 60 minutes.

This may sound like a lot of work for a bathroom that has a window in it. But as a remodeler, I’ve seen the mold and mildew problems that moisture can cause. Opening a window is a good idea, but it isn’t reliable enough to eradicate moisture effectively.

A fan beats an open window

Wired to a timer switch that allows it to run until steam is cleared, a fan in the center of the bathroom is the best defense against problems that are caused by moisture.

A fan beats an open window diagram
Drawing: Don Mannes

Protect the bathroom and yourself

Cut the ceiling and keep clean with a plastic bag and a plastic suit.

Cheap and easy dust containment. A garbage bag taped to the bathroom ceiling catches dust while the ceiling is cut. A plastic suit (available at paint stores for less than $10) protects your skin from fiberglass insulation and dust in the attic.
Cheap and easy dust containment. A garbage bag taped to the bathroom ceiling catches dust while the ceiling is cut. A plastic suit (available at paint stores for less than $10) protects your skin from fiberglass insulation and dust in the attic.

Use a template and blocking for accuracy and convenience.

Use a template and blocking for accuracy and convenience. A cardboard template cut from the fan’s box marks the cut in the attic. A piece of blocking screwed to the drywall extends be-yond the cutline to catch the scrap when it is cut free. Leaving the screw loose allows you to twist the blocking out of the saw’s path.
Use a template and blocking for accuracy and convenience. A cardboard template cut from the fan’s box marks the cut in the attic. A piece of blocking screwed to the drywall extends be-yond the cutline to catch the scrap when it is cut free. Leaving the screw loose allows you to twist the blocking out of the saw’s path.

Today’s fans are stronger yet quieter than ever

Walk into any big-box store, and you’ll find dozens of bathroom fans priced from$20 to $200. Here are a few important things to consider when choosing a fan.

panasonic fan

Power Sound level Useful features
For an average-size bathroom, the Home Ventilation Institute recommends that the fan exhaust 1 cfm (cubic foot per minute) per sq. ft. of bathroom. Sones are the measure of sound for bathroom fans. Normal conversation takes place from 3 to 4 sones. Some bath fans are quieter than 1 sone. Independently operating lights, heaters, and moisture sensors that turn on the fan as needed are nifty extras.

Prevent air leakage in the attic

Sealant, blocking, and screws secure the fan.

Keeping moisture out of the attic is critical. The two key points are installing a leak-free duct and keeping air from the bathroom from leaking around the fan.

Sealant, blocking, and screws secure the fan diagram
Drawing: Mark Hannon
Sealant prevents moisture from leaking into the attic. A thick bead of sealant around the perimeter of the hole creates an airtight bond between the fan’s flange and the drywall. Place the fan in the hole carefully, and make sure it sits flat on the ceiling and sealant.
Sealant prevents moisture from leaking into the attic. A thick bead of sealant around the perimeter of the hole creates an airtight bond between the fan’s flange and the drywall. Place the fan in the hole carefully, and make sure it sits flat on the ceiling and sealant.
Screw through the ceiling. Drywall screws anchor the fan to the ceiling and will be hid-den by the fan’s cover and light.
Screw through the ceiling. Drywall screws anchor the fan to the ceiling and will be hid-den by the fan’s cover and light.

Short, straight ductwork vents air efficiently.

When a curve is necessary, attach the duct to the fan, and create a short, sweeping arc toward the ceiling to determine the length of duct and the best location for the roof vent. Trace around the duct’s perimeter onto the inside of the roof sheathing.

Trace around the duct’s perimeter onto the inside of the roof sheathing.

A screw marks the spot on the roof. A screw driven into the center of the traced circle and through the roof sheathing marks the center of the duct and transfers the vent location to the roof where the hole will be cut.
A screw marks the spot on the roof. A screw driven into the center of the traced circle and through the roof sheathing marks the center of the duct and transfers the vent location to the roof where the hole will be cut.
Seal all ductwork tightly. The duct is slipped all the way onto the fan’s exhaust port and sealed airtight with aluminum duct tape. Don’t use common fabric-backed duct tape, which will deteriorate with time.
Seal all ductwork tightly. The duct is slipped all the way onto the fan’s exhaust port and sealed airtight with aluminum duct tape. Don’t use common fabric-backed duct tape, which will deteriorate with time.

 

Venting a bathroom fan: Get vapor out, and keep it out

The fan can exhaust air through the roof using a roof vent or out a gable-end wall using a clothes-dryer vent. But under no circumstances should the fan vent through or into the eaves or soffit. Airflow will draw vapor back into the attic through the soffit vents, making the fan little more than a waste of energy.

through the roof diagram
Drawing: Dan Thornton
out the wall diagram
Drawing: Dan Thornton

never through the soffit
Drawing: Dan Thornton

Install a leak-free proof vent

Don’t cut through tabs

Trace the vent receptacle onto the roof around the driven screw. If the circle is touching a shingle’s tabs, remove that shingle before cutting the hole.

dont cut through tabs diagram
Drawing: Mark Hannon
removing shingles
cutting away shingle for a vent
Cut a hole large enough for the vent. The hole for the vent should be slightly larger than the duct receptacle to allow the ductwork coming from the fan to slide into the sheathing and all the way onto the receptacle.
Cut a hole large enough for the vent. The hole for the vent should be slightly larger than the duct receptacle to allow the ductwork coming from the fan to slide into the sheathing and all the way onto the receptacle.
The vent faces down the roof. Slip the vent into the hole with the opening facing down, and secure it at each corner with galvanized roofing nails.
The vent faces down the roof. Slip the vent into the hole with the opening facing down, and secure it at each corner with galvanized roofing nails.

Flashing prevents water leaks

Keep water out of the attic by flashing around three sides of the roof vent.

Flashing prevents water leaks diagram
Drawing: Mark Hannon
Sides first. Slipped below the underlying tar pa-per and overlap-ping the flange, the flashing ex-tends onto the shingle below.
Sides first. Slipped below the underlying tar pa-per and overlap-ping the flange, the flashing ex-tends onto the shingle below.
Overlap every-thing. A third piece of flashing, which also slips under the tar pa-per, overlaps the flange and the side flashing.
Overlap every-thing. A third piece of flashing, which also slips under the tar pa-per, overlaps the flange and the side flashing.
Cut around the vent and replace the shingles. Be-fore the shingles are re-placed, they are cut to fit closely around the vent, overlapping the flange on the top and both sides.
Cut around the vent and replace the shingles. Be-fore the shingles are re-placed, they are cut to fit closely around the vent, overlapping the flange on the top and both sides.
Connect the duct. Back in the attic, the duct is connected to the vent and sealed with aluminum duct tape.
Connect the duct. Back in the attic, the duct is connected to the vent and sealed with aluminum duct tape.

 

One switch controls the light and fan

Bathroom fan and light combination units often are used to replace existing lights. A new fan could easily be wired to the existing switch, which would operate both the fan and the light. But for a bathroom fan to be effective, it needs to remain running after the user has left the bathroom. By wiring the light and fan on separate switches, the light can be turned off to conserve energy while the fan clears moisture from the room. Better yet, an electronic timer switch (www.efi.org) turns the fan and light on together, but has an integral timer that keeps the fan running for up to an hour after the switch and light are turned off.

Delay-timer switch keeps the fan running until the steam clears.
Delay-timer switch keeps the fan running until the steam clears.

Wiring the fan to a delay-timer switch

Although the neutrals can be spliced together and share a wire leading back to the switch box, separate power supplies are necessary for the light and fan to operate individually. A 14/3 wire, which you’ll probably have to add, is ideal for this situation.

Wiring the fanto a delay-timer switch

Mike Guertin is a builder, remodeler, and contributing editor to Fine Homebuilding from East Greenwich, R.I. Photos by Brian Pontolilo.

From Fine Homebuilding #157

View PDF
Previous: Invisible Ventilation for a Better Bath Next: How To Prevent Bath-Fan Condensation

Guide

Bathroom Design

Chapter

Cabinets and Fixtures

Sign up for eletters today and get the latest how-to from Fine Homebuilding, plus special offers.

Signing you up...

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
See all newsletters
See all newsletters

Log in or create an account to post a comment.

Sign up Log in

Become a member and get full access to FineHomebuilding.com

Bathroom Design

Bathroom Design

A complete resource for designing your dream bathroom

View Project Guide

View All Project Guides »

Become a member and get unlimited site access, including the Bathroom Design Project Guide.

Start Free Trial

Design and Planning
  • Design
  • Planning for Fixtures
Featured Bathroom Projects
  • Bathroom Remodels
Cabinets and Fixtures
  • Choosing Cabinets & Vanities
  • Building & Installing Vanities
  • Bathroom Fixtures
  • Ventilation and Lighting
See more on plumbing bathrooms in the Plumbing Project Guide
  • Sinks
  • Showers & Tubs
  • Toilets
See more on tiling showers in the Tiling Project Guide
  • Tile Shower Basics
  • Waterproofing
  • Shower Pans
  • Shower Drains
  • Shower Niches
  • Video Series: Tile a Shower
  • Video Series: Tile a Barrier-Free Bathroom

Fine Home Building

Newsletter Sign-up

  • Fine Homebuilding

    Home building tips, offers, and expert advice in your inbox.

  • Green Building Advisor

    Building science and energy efficiency advice, plus special offers, in your inbox.

  • Old House Journal

    Repair, renovation, and restoration tips, plus special offers, in your inbox.

Signing you up...

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
See all newsletters

Follow

  • Fine Homebuilding

    Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.

    Start Free Trial Now
    • Facebook
    • Instagram
    • X
    • LinkedIn
  • GBA Prime

    Get instant access to the latest developments in green building, research, and reports from the field.

    Start Free Trial Now
    • Facebook
    • YouTube
  • Old House Journal

    Learn how to restore, repair, update, and decorate your home.

    Subscribe Now
    • Facebook
    • Instagram
    • X
  • Fine Homebuilding

    Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.

    Start Free Trial Now
    • Facebook
    • Instagram
    • X
    • LinkedIn
  • GBA Prime

    Get instant access to the latest developments in green building, research, and reports from the field.

    Start Free Trial Now
    • Facebook
    • YouTube
  • Old House Journal

    Learn how to restore, repair, update, and decorate your home.

    Subscribe Now
    • Facebook
    • Instagram
    • X

Membership & Magazine

  • Online Archive
  • Start Free Trial
  • Magazine Subscription
  • Magazine Renewal
  • Gift a Subscription
  • Customer Support
  • Privacy Preferences
  • About
  • Contact
  • Advertise
  • Careers
  • Terms of Use
  • Site Map
  • Do not sell or share my information
  • Privacy Policy
  • Accessibility
  • California Privacy Rights

© 2025 Active Interest Media. All rights reserved.

Fine Homebuilding receives a commission for items purchased through links on this site, including Amazon Associates and other affiliate advertising programs.

  • Home Group
  • Antique Trader
  • Arts & Crafts Homes
  • Bank Note Reporter
  • Cabin Life
  • Cuisine at Home
  • Fine Gardening
  • Fine Woodworking
  • Green Building Advisor
  • Garden Gate
  • Horticulture
  • Keep Craft Alive
  • Log Home Living
  • Military Trader/Vehicles
  • Numismatic News
  • Numismaster
  • Old Cars Weekly
  • Old House Journal
  • Period Homes
  • Popular Woodworking
  • Script
  • ShopNotes
  • Sports Collectors Digest
  • Threads
  • Timber Home Living
  • Traditional Building
  • Woodsmith
  • World Coin News
  • Writer's Digest
Active Interest Media logo
X
X
This is a dialog window which overlays the main content of the page. The modal window is a 'site map' of the most critical areas of the site. Pressing the Escape (ESC) button will close the modal and bring you back to where you were on the page.

Main Menu

  • How-To
  • Design
  • Tools & Materials
  • Video
  • Blogs
  • Forum
  • Project Guides
  • Reader Projects
  • Magazine
  • Members
  • FHB House

Podcasts

  • FHB Podcast
  • ProTalk

Webinars

  • Upcoming and On-Demand

Podcasts

  • FHB Podcast
  • ProTalk

Webinars

  • Upcoming and On-Demand

Popular Topics

  • Kitchens
  • Business
  • Bedrooms
  • Roofs
  • Architecture and Design
  • Green Building
  • Decks
  • Framing
  • Safety
  • Remodeling
  • Bathrooms
  • Windows
  • Tilework
  • Ceilings
  • HVAC

Magazine

  • Current Issue
  • Past Issues
  • Magazine Index
  • Subscribe
  • Online Archive
  • Author Guidelines

All Access

  • Member Home
  • Start Free Trial
  • Gift Membership

Online Learning

  • Courses
  • Project Guides
  • Reader Projects
  • Podcast

More

  • FHB Ambassadors
  • FHB House
  • Customer Support

Account

  • Log In
  • Join

Newsletter

Get home building tips, offers, and expert advice in your inbox

Signing you up...

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
See all newsletters
See all newsletters

Follow

  • X
  • YouTube
  • instagram
  • facebook
  • pinterest
  • Tiktok

Join All Access

Become a member and get instant access to thousands of videos, how-tos, tool reviews, and design features.

Start Your Free Trial

Subscribe

FHB Magazine

Start your subscription today and save up to 70%

Subscribe

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to expert advice, how-to videos, Code Check, and more, plus the print magazine.

Start your FREE trial

Already a member? Log in

Privacy Policy Update

We use cookies, pixels, script and other tracking technologies to analyze and improve our service, to improve and personalize content, and for advertising to you. We also share information about your use of our site with third-party social media, advertising and analytics partners. You can view our Privacy Policy here and our Terms of Use here.

Cookies

Analytics

These cookies help us track site metrics to improve our sites and provide a better user experience.

Advertising/Social Media

These cookies are used to serve advertisements aligned with your interests.

Essential

These cookies are required to provide basic functions like page navigation and access to secure areas of the website.

Delete My Data

Delete all cookies and associated data