FHB Logo Facebook LinkedIn Email Pinterest Twitter X Instagram Tiktok YouTube Plus Icon Close Icon Navigation Search Icon Navigation Search Icon Arrow Down Icon Video Guide Icon Article Guide Icon Modal Close Icon Guide Search Icon Skip to content
Subscribe
Log In
  • How-To
  • Design
  • Tools & Materials
  • Restoration
  • Videos
  • Blogs
  • Forum
  • Magazine
  • Members
  • FHB House
  • Podcast
Log In

Fine Homebuilding Project Guides

Insulation

Guide Home
  • Energy Efficiency
  • Air-Sealing
  • Choosing Insulation
  • Installing Insulation
  • Water Management
Ask the Experts

How to Insulate a Floor over a Crawlspace

Use a combination of batts, continuous rigid foam, and a vapor barrier to safely insulate this tricky space.

By Matthew Millham Issue 282 - April/May 2019
  • X
  • facebook
  • linkedin
  • pinterest
  • email
  • add to favorites Log in or Sign up to save your favorite articles

We have a home with a finished basement under most of the house and a vented crawlspace under the remaining 500 sq. ft. The crawlspace is completely sealed off from the basement, and there’s no ductwork in it. The entire first floor is framed with I-joists. When the house was built, we installed two 6-in. R-19 batts into each joist bay in the crawlspace and stapled chicken wire to the bottoms of the joists to hold it in place. The batts don’t fill the spaces between the joists because of the narrow webs, so their performance is less than optimal. We would like to correct this and are thinking of thickening up the joists with sheets of foam, then reinstalling the fiberglass and chicken wire.

Since this is a pretty amateur solution, we would appreciate your opinion on this method and are open to suggestions for a better way.

—ARLAN AND BARBARA ZASTROW, Roseburg, Ore.

Associate editor Matthew Millham responds: Your plan should improve your floor’s thermal performance, but there are things you could do to make it even better.

Let me start by saying that crawlspaces can be tricky. Some assemblies work in some climates but not in others. Two popular approaches are to seal the crawlspace and make it part of the conditioned space, or to seal it off from the conditioned space and vent it. Building scientists tend to like the first option, but research has found that either option works in the maritime climate of the Pacific Northwest as long as there aren’t ducts in the crawlspace, and you’re okay there.

Assuming that you want to stick with your vented crawlspace and that you’ve already removed the fiberglass batts, start by air-sealing the rim joist to keep outside air from leaking into the floor insulation. Use high-quality caulk or canned closed-cell spray foam to seal any gaps between the mudsill and the rim joist and between the rim joist and subfloor, as well as any similar gaps around end joists.

Your plan to pack out the I-joists with rigid foam so the batts fit snugly between them is fine, but it’s a lot of work for a workaround. Look into fiberglass or mineral-wool batts designed for use in steel-frame buildings. These batts are slightly wider and should fit snugly between your I-joists without the need for foam filler strips. Whether you keep the old batts or get wider ones, make sure they’re in contact with the subfloor as the energy code requires for optimal thermal performance.

Once the batts are back in, add a continuous 1-in. to 2-in. layer of rigid foil-faced polyiso foam insulation to the bottom of the joists. This will reduce thermal bridging through the joists, provide an air barrier, and add to the R-value of the whole floor assembly. The polyiso can also help keep the joists and insulation warm and above the dew point so they don’t get wet and moldy.

Seal the seams between polyiso sheets and between the polyiso and walls with high-quality housewrap tape to create a good air barrier, and use canned closed-cell spray foam to fill any gaps between the foam and that drainpipe. As long as you aren’t using the crawlspace for storage and don’t have any fuel-fired appliances in there, you shouldn’t need additional fire protection on the crawlspace ceiling, but check with your local code official to make sure. If you want or need further protection from pests, add a layer of OSB beneath the foam.

One last thing: If you don’t have one already, install a vapor barrier on the crawlspace floor to keep the space from getting damp from below. Cover the entire crawlspace floor in the vapor barrier (usually 6-mil or thicker polyethylene sheeting) and run the edges at least 6 in. up the stem walls. Attach and seal the sheeting to the walls with horizontal furring strips and mastic, and lap any seams at least 6 in. and seal or tape them as well.

Drawings: Dan Thornton

Previous: Insulating a Wood-Framed Floor Assembly Next: How to Reduce Heat Loss Through Footings

Guide

Insulation

Chapter

Installing Insulation

Sign up for eletters today and get the latest how-to from Fine Homebuilding, plus special offers.

Signing you up...

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
See all newsletters
See all newsletters

View Comments

  1. Jasonr64 | Jul 19, 2021 02:51pm | #1

    I'm dealing with excessively cold floors and this article was very helpful. I have a vented crawlspace in Central Wisconsin that is approx. 1000 sq ft. The walls have 1" of EPS foam, but the floor is gravel. Rim joists have approx. 1" of spray foam. The crawlspace is very dry and does not have any observable mold or water infiltration. The only flaw that I see with this approach is access and visibility. If any pipes burst from above there is no possible way to see the damage from below. Additionally, any plumbing work, electrical, etc. would be problematic. Could you utilize a 1-2" solid foam board against the subfloor between the joists to achieve similar effects? I understand that there could be some thermal bridging between the joists, but I'm not sure how much of an impact would affect my R-value? Any advice is appreciated.

    1. Bobcatm | Jan 30, 2023 04:47pm | #2

      Jason - Did you ever get any good answers to your question? I have a similar situation under my kitchen were I don't want to make access to wiring and plumbing too difficult. Also i'm in a much milder climate (San Francisco area). Thx & Go Badgers!

    2. stevejahr | Feb 27, 2023 07:19pm | #3

      While not a pro... as a fellow do it myself homeowner who has contemplated this kind of thing, I will offer some thoughts.

      First is on the observability aspect. None of us routinely nor regularly inspect our crawl spaces. So it does not really matter if we can see anything. In the hypothetical pipe burst or leak our first indication will be the same as always with either noise or other signs of running watter. Still have to repair and dry out just like always.

      Next is on serviceability. This will depend greatly how the foam is attached. In any service situation the foam is likely to be undamaged and could simply be removed, set aside, and later reinstalled. True you would need to re-tape any seams.

      Avoiding the thermal bridging is a big part of the point here as any insulation will be only as effective as it's coverage. Keeping the foam layer on the bottom goes a long way towards getting real benefit.

Log in or create an account to post a comment.

Sign up Log in

Become a member and get full access to FineHomebuilding.com

Insulation

Insulation

Trusted, comprehensive guidance from the pros for a home that is healthy, comfortable, and energy efficient

View Project Guide

View All Project Guides »

Become a member and get unlimited site access, including the Insulation Project Guide.

Start Free Trial

Energy Efficiency
  • Understanding Energy and Houses
  • Building Energy-Efficient Homes
Air-Sealing
  • Air-Sealing Basics
  • Air-Sealing Tools and Materials
  • Foundations and Floors
  • Walls, Windows, and Doors
  • Attics and Roofs
Choosing Insulation
  • Insulation Basics
  • Material Choices
Installing Insulation
  • Insulating Attics and Roofs
  • Insulating Walls
  • Insulating Floors, Footings, and Slabs
  • Insulating Foundation Walls
Water Management
  • Water-Management Principles
  • Materials
  • Installation Methods

Fine Home Building

Newsletter Sign-up

  • Fine Homebuilding

    Home building tips, offers, and expert advice in your inbox.

  • Green Building Advisor

    Building science and energy efficiency advice, plus special offers, in your inbox.

  • Old House Journal

    Repair, renovation, and restoration tips, plus special offers, in your inbox.

Signing you up...

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
See all newsletters

Follow

  • Fine Homebuilding

    Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.

    Start Free Trial Now
    • Facebook
    • Instagram
    • X
    • LinkedIn
  • GBA Prime

    Get instant access to the latest developments in green building, research, and reports from the field.

    Start Free Trial Now
    • Facebook
    • YouTube
  • Old House Journal

    Learn how to restore, repair, update, and decorate your home.

    Subscribe Now
    • Facebook
    • Instagram
    • X
  • Fine Homebuilding

    Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.

    Start Free Trial Now
    • Facebook
    • Instagram
    • X
    • LinkedIn
  • GBA Prime

    Get instant access to the latest developments in green building, research, and reports from the field.

    Start Free Trial Now
    • Facebook
    • YouTube
  • Old House Journal

    Learn how to restore, repair, update, and decorate your home.

    Subscribe Now
    • Facebook
    • Instagram
    • X

Membership & Magazine

  • Online Archive
  • Start Free Trial
  • Magazine Subscription
  • Magazine Renewal
  • Gift a Subscription
  • Customer Support
  • Privacy Preferences
  • About
  • Contact
  • Advertise
  • Careers
  • Terms of Use
  • Site Map
  • Do not sell or share my information
  • Privacy Policy
  • Accessibility
  • California Privacy Rights

© 2025 Active Interest Media. All rights reserved.

Fine Homebuilding receives a commission for items purchased through links on this site, including Amazon Associates and other affiliate advertising programs.

  • Home Group
  • Antique Trader
  • Arts & Crafts Homes
  • Bank Note Reporter
  • Cabin Life
  • Cuisine at Home
  • Fine Gardening
  • Fine Woodworking
  • Green Building Advisor
  • Garden Gate
  • Horticulture
  • Keep Craft Alive
  • Log Home Living
  • Military Trader/Vehicles
  • Numismatic News
  • Numismaster
  • Old Cars Weekly
  • Old House Journal
  • Period Homes
  • Popular Woodworking
  • Script
  • ShopNotes
  • Sports Collectors Digest
  • Threads
  • Timber Home Living
  • Traditional Building
  • Woodsmith
  • World Coin News
  • Writer's Digest
Active Interest Media logo
X
X
This is a dialog window which overlays the main content of the page. The modal window is a 'site map' of the most critical areas of the site. Pressing the Escape (ESC) button will close the modal and bring you back to where you were on the page.

Main Menu

  • How-To
  • Design
  • Tools & Materials
  • Video
  • Blogs
  • Forum
  • Project Guides
  • Reader Projects
  • Magazine
  • Members
  • FHB House

Podcasts

  • FHB Podcast
  • ProTalk

Webinars

  • Upcoming and On-Demand

Podcasts

  • FHB Podcast
  • ProTalk

Webinars

  • Upcoming and On-Demand

Popular Topics

  • Kitchens
  • Business
  • Bedrooms
  • Roofs
  • Architecture and Design
  • Green Building
  • Decks
  • Framing
  • Safety
  • Remodeling
  • Bathrooms
  • Windows
  • Tilework
  • Ceilings
  • HVAC

Magazine

  • Current Issue
  • Past Issues
  • Magazine Index
  • Subscribe
  • Online Archive
  • Author Guidelines

All Access

  • Member Home
  • Start Free Trial
  • Gift Membership

Online Learning

  • Courses
  • Project Guides
  • Reader Projects
  • Podcast

More

  • FHB Ambassadors
  • FHB House
  • Customer Support

Account

  • Log In
  • Join

Newsletter

Get home building tips, offers, and expert advice in your inbox

Signing you up...

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
See all newsletters
See all newsletters

Follow

  • X
  • YouTube
  • instagram
  • facebook
  • pinterest
  • Tiktok

Join All Access

Become a member and get instant access to thousands of videos, how-tos, tool reviews, and design features.

Start Your Free Trial

Subscribe

FHB Magazine

Start your subscription today and save up to 70%

Subscribe

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to expert advice, how-to videos, Code Check, and more, plus the print magazine.

Start your FREE trial

Already a member? Log in

Privacy Policy Update

We use cookies, pixels, script and other tracking technologies to analyze and improve our service, to improve and personalize content, and for advertising to you. We also share information about your use of our site with third-party social media, advertising and analytics partners. You can view our Privacy Policy here and our Terms of Use here.

Cookies

Analytics

These cookies help us track site metrics to improve our sites and provide a better user experience.

Advertising/Social Media

These cookies are used to serve advertisements aligned with your interests.

Essential

These cookies are required to provide basic functions like page navigation and access to secure areas of the website.

Delete My Data

Delete all cookies and associated data