If a deck rail spans more than 5 ft. or so, I think it’s important to support the bottom rail, using something that won’t rot. I’ve tried various approaches to this problem. The drawing illustrates my favorite solution. Instead of wood, I use short lengths of PVC pipe, cut with a chopsaw into little cylinders.
For a 2x bottom rail, I use 1-1/4 in. O. D. (outside diameter) pipe, cut into lengths that fit snugly under the rail. To hold them in place, I run a 7-in. square-drive gutter screw through the bottom rail, through the PVC cylinder, and well into the deck, burying the screw head. This works particularly well because I use a minimum 3-in.- deep bottom rail.
The PVC cylinders are strong and unobtrusive, they hold paint well, and they won’t deteriorate or wick water into the rail.
Forrest McCanless, via email, None
Old House Journal Recommended Products
Fine Homebuilding receives a commission for items purchased through links on this site, including Amazon Associates and other affiliate advertising programs.
MicroFoam Nitrile Coated Work Gloves
4-Gallon Piston Backpack Sprayer
Standard Marking Chalk
