FHB Logo Facebook LinkedIn Email Pinterest Twitter X Instagram Tiktok YouTube Plus Icon Close Icon Navigation Search Icon Navigation Search Icon Arrow Down Icon Video Guide Icon Article Guide Icon Modal Close Icon Guide Search Icon Skip to content
Subscribe
Log In
  • How-To
  • Design
  • Tools & Materials
  • Restoration
  • Videos
  • Blogs
  • Forum
  • Magazine
  • Members
  • FHB House
  • Podcast
Log In
Video

Hammer to Hammer

By Ed Pirnik
  • X
  • facebook
  • linkedin
  • pinterest
  • email
  • add to favorites Log in or Sign up to save your favorite articles
Video Player is loading.
Current Time 0:00
/
Duration 0:00
Loaded: 0%
Stream Type LIVE
Remaining Time -0:00
 
1x
    • Chapters
    • descriptions off, selected
    • captions settings, opens captions settings dialog
    • captions off, selected

      This is a modal window.

      Beginning of dialog window. Escape will cancel and close the window.

      Text
      Background
      Window
      Font Size
      Text Edge Style
      Font Family

      End of dialog window.

      This is a modal window. This modal can be closed by pressing the Escape key or activating the close button.

      This is a modal window. This modal can be closed by pressing the Escape key or activating the close button.

      For a few years now, one of my guilty pleasures has been to plop down on the couch with a frosty beer, flip on the TV and tune in to Mythbusters. I simply can’t get my head around the fact that these folks have been able to find someone to pay them for having fun. God, what I’d give to be able to hang out in a shop all day and invent any number of hair-brained devices aimed at testing the abusrd, the little-known, and the just plain crazy!

      Drum roll please . . . . Ladies and gentleman: my day has finally arrived.

      A recent post on the dangers of striking two hammers (see photo above) together by the folks at our sister publication, Fine Woodworking, generated a great deal of commentary. Among the gruesome true-life stories sent to us by readers were these three gems:

      “. . . my final strike caused the hammer head to EXPLODE, leaving a marble size pellet missing from the hammer head and a corresponding hole in my leather apron, my denim jeans and my kneecap.”

      “. . . when I was a youngster I too struck two hardened surfaces together, a sledgehammer onto an ax, trying to split an ornery piece of firewood. The result was a large razor sharp chip deeply slicing my leg.”

      “When I was 12 years old I built my first tree-house. At the end of one workday I was walking up the driveway to my house in Atlanta carrying 2 hammers and banging the heads together in a typically vigorous 12 year old way. Suddenly a searing pain erupted in my left pointer finger knuckle as a hot piece of hammer-head shrapnel flew into my hand.”

      I decided this would be the perfect opportunity to build my own hammer-smashing rig and let the chips fly. Now, before some folks begin firing off emails to me regarding the nature of my rig, please note that this wasn’t meant to be a strictly controlled scientific test. I simply wanted to bang the heck out of a couple of hammers and record the results.

      And what happened? Well, you’ll have to watch the video to find out. As for me, my mythbusting days are over. It’s time to get back to the nuts-and-bolts of Fine Homebuilding, but rest-assured, if there’s another crazy rig to be built, I’ll be there.

      Enjoy!

      For more on hammer tech, visit our tool guide entry on titanium vs. steel.

      Sign up for eletters today and get the latest how-to from Fine Homebuilding, plus special offers.

      Signing you up...

      This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
      See all newsletters
      See all newsletters
      ×

      Get home building tips, offers, and expert advice in your inbox

      Signing you up...

      This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
      See all newsletters
      See all newsletters

      New Feature

      Fine Homebuilding Forums

      Ask questions, offer advice, and share your work

      • X
      • facebook
      • linkedin
      • pinterest
      • email
      • add to favorites Log in or Sign up to save your favorite articles

      View Comments

      1. JFink | Aug 21, 2009 09:47am | #1

        Great video!!

      2. Loadmaster | Aug 24, 2009 02:17pm | #2

        Back when I was a sixteen year old kid, I got a dumb idea. Out of boredom, I started playing with the tools we had in the shed; I decided to grab two hammers and started banging thm together. It wasn't too long, maybe a bout ten strokes or a bit more, when one chip flew off of one of the hammers and hit my arm, halfways up to my elbow.

      3. Metalsguy | Aug 24, 2009 03:25pm | #3

        Great Video, A cross between a mattress advertisement and some of the shop teachers I've known. Try freezing both heads, freezing both heads entirely. Drop forged hammer heads give the advantage of the molecular structure of the metal to follow the shape of the head. This molecular pattern resembles wood grain and the Forging process takes advantage of it. The things to avoid are cast steel, cast iron, and machined steel ( hammers blanked from common stock (mild steel). Drop-forged heads are okay to be machined, so look for signs of forging. A good Hammer usually makes a good ringing sound ( when struck).

      4. chemdad | Aug 24, 2009 03:40pm | #4

        New house are being built all around me. NOBODY wears safety glasses. Forget the hammer heads. Those workers I see are in constant peril from their own negligence.

      5. montereybay20 | Aug 24, 2009 04:42pm | #5

        I also stupidly was using one hammer to hit another. A piece of shrapnel about an eight of an inch in diameter chipped off the edge of the hammer face and entered my wrist, embedding itself under the skin. It was superficial enough that I was able to use a utility knife to cut it out...I learned my lesson.

      6. psluss0822 | Aug 24, 2009 04:44pm | #6

        I dont see a big probelm hitting two hammers together expecially if your wearing safty glasses. I have done this a couple times when a pry bar was not arround and like the video nothing happened. Think about it, we hit nails, pry bars, other metal objects and sometimes concrete with hammers. They are made to take abuse!!!!

      7. toolmonger | Aug 24, 2009 06:51pm | #7

        Mythbusters actually tested this theory and "proved" it wrong. They set up a rig similar to what Ed built and had the same results. It seems the difference in the "myths" and the experiments is repeated hits and indirect hits. As we all know, what is produced in a lab and what happens in the real world often do not match. I've also hit many hammers to hammers and have yet to pick up any schrapnel, but I'll probably remember to put on my glasses and gloves next time.

      8. BldrMtnMn | Aug 24, 2009 08:19pm | #8

        I know that many think that the dangers of banging hammer heads together is minimal, but my life experience says otherwise. At age ten I was engaged in just such an activity while on a school sleepover field trip. I was tearing boards of with one hammer facing up, with the claw under the board and striking vigorously with another. I'm not sure how many strikes, but I would say a good ten minutes of this activity caused one of the hammers to shatter sending shards of steel into my left eye. Three of the shards remain to this day in my eye, they got two on the initial operation. I'm 51 now, so the accident was some 40 years ago, but the sound of two hammers being struck together, still raise the hairs on the back of my neck. I learned the hard way, I would recommend finding a different method.

      9. Sharkbait | Aug 24, 2009 09:47pm | #9

        Why would you not just use a catspaw? There is a reason the are made of a soft untempered metal. I've see the aftermath of this kind of stupidity. Working on setting trusses with another guy. He borrowed someone else's hammer to help remove a truss spacer and bam! A piece the size of a .22 shot into his forearm. I was warned against this by my dad growing up. The right tool for the job.

      10. DVanditmars | Aug 25, 2009 01:09am | #10

        The specific metallurgy of the hammer(s) used will determine if there will be chips flying or not.

      11. Eyeguys | Aug 25, 2009 01:15am | #11

        try a nasty old rusty hammer. As the Ophthalmologist on-call, I can tell you, metal to metal impacts can send tiny sharp fragments right through your contact lens, cornea, anterior chamber, lens, vitreous, and become imbed into your retina and all you may feel is a transient sharp pain. All your ER doctor may find wrong is a corneal abrasion. As a weekend remodeler, I hammer away, but use safety glasses like my vision dependson it.

      12. epirnik | Aug 25, 2009 09:39am | #12

        Metalsguy: I could have used you when setting this rig up!

        Chemdad: Tell me about it! I once quit a framing crew up in Rochester, New York after I discovered that one of the guys sheathing roofs with me was a drug addict. Never safe to be tossin' around sheets of 4x8 with someone who is high as a kite. Walked off the job that afternoon and didn't look back.

        I think that in the end, there are simply so many variables involved, that actually reproducing it can be touch. Casting, forging methods, etc, are handled differently in different countries. Who knows what kind of oversight foreign manufacturing firms have in place. Looking back, I don't think it's so surprising that it didn't work out the way I had hoped! But like I said, I've heard too many stories - from you folks and those over at Fine Woodworking - to ignore the phenomenon!

        Cheers all,

        -Ed

      13. gonuts | Aug 25, 2009 10:25am | #13

        What about Ti hammers? Are the resistant to chipping?
        They make Ti cats paws also, so does that mean it is fine to drive away on them.
        If the cats paw weighs half of the steel one I would be more likely to have one in my bags. That is if they didn't cost two hours wages for a consumable tool.

      14. lochness | Aug 25, 2009 12:35pm | #14

        Who is stupid enough to hit to hammers together. This is darwins theory in full effect. If you ask to borrow someones hammer, what he doing while your beating on it. Standing there wasting time? Must be an east coast thing, just like sidewinders

      15. epirnik | Aug 25, 2009 01:13pm | #15

        gonuts: I'm seeing the Stiletto TIBAR 16" going for $209. It's anything but cheap!

        And as I said in the video - I've seen PLENTY of folks over the years banging on a hammer head in order to coax the claw under a stubborn nail head.

      16. epirnik | Aug 25, 2009 01:14pm | #16

        Metalsguy: "Great Video, A cross between a mattress advertisement and some of the shop teachers . . . " Maybe I should have gone for a more "Billy Mays" look. LOL

      17. Cadabra | Aug 25, 2009 04:14pm | #17

        Ed -
        Between you and the Mythbusters I think you've both proved that metallurgy has everything to do with hammer safety. And, of course the drop forging process is the other key. Actually, the two go hand-in-hand. Yes indeed, Metalsguy got it right.

        The cheap steel hammers of yesteryear are where the lore, legends and horror stories are made. Millions of them still linger-on in garages, basement tool benches, and Dad's old tool box. Just toss the old dog out if you're not certain of its pedigree! Buy a well made hammer that is drop forged and you will most likely never have a problem with it chipping or shattering. None the less (all the more, even so) just never strike any hardened steel or brittle object with a hammer. Forgo the cheap punches and chisels at Harbor Freight; they are dangerous.

        Reading the comments with stories of eye shrapnel are bone-chilling. Wearing safety glasses is a small inconvenience to save your vision. Just wear a patch over one eye for a full day. After that, you will gladly wear safety glasses over both eyes for the rest of your days at work.

      18. Bark | Aug 26, 2009 10:25am | #18

        As a kid I was at the nieghbors building a go-cart. The dad in charge was trying to remove a bearing from a wheel and placed the point of a geologist hammer on the bearing and struck the square end with a ballpean hammer. Us kids were amazed at the stream of blood spouting from his hand 2 feet in the air. A chip had come off the geologist hammer and entered his hand between the thumb and index finger clipping the artery. We all learned something that day, right tool for the job means everything, plus the magic of metalurgy. I liked the tip about cheap chisels and punches, I won't use one with a mushroomed head either, a minute on the grinder seems a small price to pay for safety.

      19. dmkatz01 | Aug 26, 2009 09:05pm | #19

        I agree with your final statement, "My eyes are too important to me to tempt fate".
        Everyone should wear quality safety glasses when working in the shop.
        The only reason you didn't generate a chip is that your hammers looked to be in fairly good (perhaps fairly new) condition.
        As a safety professional, I've pulled many a mushroomed hammer head out of the hands of production and maintenance employees. This is the most likely source of a chip (although it doesn't have to be mushroomed, just work hardened until it is brittle).

        Take care of yourselves.

      20. ShaneDugas | Aug 27, 2009 09:23pm | #20

        Never hit two hammers together!!! My dad currently has only 5-10% of his vision left in one of his eyes as a result of this exact thing. One of the teeth on a waffle head hammer chipped off and flew into his eye.

      21. Coffered | Oct 07, 2009 04:53pm | #21

        Your benchtest did not result in either hammer shattering because your rig could not develop the high energy needed to shear dense forged steel. Your rig failed to ascribe to the general principle that mass times speed equals force. A heavy mass traveling at a slow speed won't get the job done. Give your good ole' human arm some credit...the energy accumulated via swinging a hammer with your arm is waaaaaaay higher than swinging that cumbersome wooden rig because your arm is swinging the hammer with a much higher head speed, plus your arm represents a good 20+lbs of mass behind it. I am going to estimate your rig's maximum speed at maybe 30mph, while a good estimate of the head speed of your arm-swung hammer would be in the vicinity of 60mph+. When you swing a hammer your arm speed is only about 30mph; but, the whipping motion of your wrist accelerates the hammer head exponentially, thereby causing head speed in excess of 60mph that regularly drives 12penny nails in one stroke by experienced framers. I would have liked to have seen you do the shatter test swinging the hammer with your arm. You could have worn flexible kevlar arm protectors available cheap at safety clothing outlets and used plexiglass sheeting to protect the rest of your body and swung away. I bet you could have exploded that hammer in less than a hundred swings. You could use that Mythbusters test firing gel to measure the penetration if you wanted to kick out a hundred bucks or so for the gel.
        Someone wrote that forged hammers resist shattering. WRONG! Forged hammers are the ones that explode with the most lethality. A forged hammer's molecules are so densely packed that it is difficult to separate them. But the strength of their density is potential energy waiting to explode violently when acted upon with sufficient energy. A forged hammer is so hard it shatters relatively easily. Forged gearsets in automobiles are treated to bend slightly under the immense forces of a hard launch because the very strength in forging that they need to handle extreme stresses is the cause of them exploding like a hand grenade if not alloyed with components that modify their tensile properties to allow them to flex a bit. I would be surprised if these tensile softening components are included in the mix when they are selling a $30.00 hammer.
        I have hit cat's paws a bazillion times and never caused shattering because the paw is not forged. It is soft metal that is not prone to shattering. I have also hit forged hammer to forged hammer many times without a shattering. I was lucky. It was only when I hit a forged hammer to a forged automotive spindle that I ended up in the hospital getting a shard of spindle pulled out of my forehead where it stopped only after contacting my skull. The spindle end was relatively small, and it was threaded, thereby giving it an avenue to shear and ricochet off the backing plate at an untold rate of speed directly into my head. A hammer, by virtue of its large head, is not prone to shearing. So it would be difficult to cause a failure. But, I am sure it can happen...and with possibly dangerous consequences. Someone also wrote about a mushroomed hammer having a greater propensity to shatter. I haven't seen a forged hammer mushroom appreciably, so I would have to assume this was a cheap Harry Homeowner hammer. One should have the presence of mind to throw away any tool that has been used beyond a safe condition. Noone would be surprised if a mushroomed hammer blew apart.
        It isn't a perfect world, as a professional framer I often find a need to swing hammer against hammer, albeit reluctantly. Very few framers wear eye protection. Some find it uncomfortable to wear eye protection forty hours a week. I tell the guys who insist they don't want to wear goggles that they might as well leave their eyes wide open to at least save their eyelid when that shard is coming at them at probably upwards of a thousand feet per second...nuff said

      22. bobwojo | May 23, 2017 10:37pm | #22

        I still have a BB size piece on a hammer in my wrist, been there 37 years. It's in soft tissue, specialist said it could do more damage trying to take it out.

      23. Close_Enough | Oct 14, 2018 07:52pm | #23

        B.S Physics, Woodworker 40+ years. Your test should have had the two heads glancing of the edges, not squarely hit. The two equally hard pieces of metal will splinter off and the speed is incredible. My boss (Air Force aviator) lost his eye to a needle shaped 1/4" long shard coming off the edge as he tried to pry up a nail off his deck. I wish I had been there with him to help. Here's my question. Hammers were not meant to hit head to head. Why on earth are you using one of the tools incorrectly (Not as designed)? Use a damn cat's claw. Softer metal - by design for precisely this reason. You guys arguing about this subject - it's like listening to an argument about hot water freezing. To say it's OK to do, is like saying it's OK to nail up the guard on a skilsaw, you know...just be careful. right.

      Log in or create an account to post a comment.

      Sign up Log in

      Become a member and get full access to FineHomebuilding.com

      Up Next

      Video Shorts

      Featured Story

      Podcast Episode 685: Patching Drywall, Adding Air Barriers, and Rotted Walls

      Listeners write in about running a profitable contracting business and ask questions about patching drywall, adding air barriers, and fixing a patio poured against the house.

      Featured Video

      Builder’s Advocate: An Interview With Viewrail

      Learn more about affordable, modern floating stairs, from design to manufacturing to installation.

      Related Stories

      • Podcast Episode 685: Patching Drywall, Adding Air Barriers, and Rotted Walls
      • Podcast Episode 684: Masonry Heaters, Whole-House Ventilation, and Porch Flooring
      • Podcast Episode 683: Barndominiums, ERVs, and Radon Mitigation
      • Podcast Episode 682: Basement Flooring, Architectural Salvage, and HVAC Ducts

      Discussion Forum

      Recent Posts and Replies

      • |
      • |
      • |
      • |
      • |
      • |
      View More Create Post

      Highlights

      Fine Homebuilding All Access
      Fine Homebuilding Podcast
      Tool Tech
      Plus, get an extra 20% off with code GIFT20

      Video

      View All Videos
      • Podcast Episode 678: Live from the Builders' Show-Part 2
      • Podcast Episode 677: Live from the Builders' Show-Part 1
      • FHB Podcast Segment: The Best of the Fine Homebuilding Podcast, Volume 8
      • FHB Podcast Segment: Larsen-Truss Retrofit to Existing Stud-Frame House
      View All

      Fine Homebuilding Magazine

      • Issue 331 - June 2025
        • A More Resilient Roof
        • Tool Test: You Need a Drywall Sander
        • Ducted vs. Ductless Heat Pumps
      • Issue 330 - April/May 2025
        • Deck Details for Durability
        • FAQs on HPWHs
        • 10 Tips for a Long-Lasting Paint Job
      • Issue 329 - Feb/Mar 2025
        • Smart Foundation for a Small Addition
        • A Kominka Comes West
        • Making Small Kitchens Work
      • Issue 328 - Dec/Jan 2024
        • How a Pro Replaces Columns
        • Passive House 3.0
        • Tool Test: Compact Line Lasers
      • Issue 327 - November 2024
        • Repairing Damaged Walls and Ceilings
        • Plumbing Protection
        • Talking Shop

      Fine Home Building

      Newsletter Sign-up

      • Fine Homebuilding

        Home building tips, offers, and expert advice in your inbox.

      • Green Building Advisor

        Building science and energy efficiency advice, plus special offers, in your inbox.

      • Old House Journal

        Repair, renovation, and restoration tips, plus special offers, in your inbox.

      Signing you up...

      This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
      See all newsletters

      Follow

      • Fine Homebuilding

        Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.

        Start Free Trial Now
        • Facebook
        • Instagram
        • X
        • LinkedIn
      • GBA Prime

        Get instant access to the latest developments in green building, research, and reports from the field.

        Start Free Trial Now
        • Facebook
        • YouTube
      • Old House Journal

        Learn how to restore, repair, update, and decorate your home.

        Subscribe Now
        • Facebook
        • Instagram
        • X
      • Fine Homebuilding

        Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.

        Start Free Trial Now
        • Facebook
        • Instagram
        • X
        • LinkedIn
      • GBA Prime

        Get instant access to the latest developments in green building, research, and reports from the field.

        Start Free Trial Now
        • Facebook
        • YouTube
      • Old House Journal

        Learn how to restore, repair, update, and decorate your home.

        Subscribe Now
        • Facebook
        • Instagram
        • X

      Membership & Magazine

      • Online Archive
      • Start Free Trial
      • Magazine Subscription
      • Magazine Renewal
      • Gift a Subscription
      • Customer Support
      • Privacy Preferences
      • About
      • Contact
      • Advertise
      • Careers
      • Terms of Use
      • Site Map
      • Do not sell or share my information
      • Privacy Policy
      • Accessibility
      • California Privacy Rights

      © 2025 Active Interest Media. All rights reserved.

      Fine Homebuilding receives a commission for items purchased through links on this site, including Amazon Associates and other affiliate advertising programs.

      • Home Group
      • Antique Trader
      • Arts & Crafts Homes
      • Bank Note Reporter
      • Cabin Life
      • Cuisine at Home
      • Fine Gardening
      • Fine Woodworking
      • Green Building Advisor
      • Garden Gate
      • Horticulture
      • Keep Craft Alive
      • Log Home Living
      • Military Trader/Vehicles
      • Numismatic News
      • Numismaster
      • Old Cars Weekly
      • Old House Journal
      • Period Homes
      • Popular Woodworking
      • Script
      • ShopNotes
      • Sports Collectors Digest
      • Threads
      • Timber Home Living
      • Traditional Building
      • Woodsmith
      • World Coin News
      • Writer's Digest
      Active Interest Media logo
      X
      X
      This is a dialog window which overlays the main content of the page. The modal window is a 'site map' of the most critical areas of the site. Pressing the Escape (ESC) button will close the modal and bring you back to where you were on the page.

      Main Menu

      • How-To
      • Design
      • Tools & Materials
      • Video
      • Blogs
      • Forum
      • Project Guides
      • Reader Projects
      • Magazine
      • Members
      • FHB House

      Podcasts

      • FHB Podcast
      • ProTalk

      Webinars

      • Upcoming and On-Demand

      Podcasts

      • FHB Podcast
      • ProTalk

      Webinars

      • Upcoming and On-Demand

      Popular Topics

      • Kitchens
      • Business
      • Bedrooms
      • Roofs
      • Architecture and Design
      • Green Building
      • Decks
      • Framing
      • Safety
      • Remodeling
      • Bathrooms
      • Windows
      • Tilework
      • Ceilings
      • HVAC

      Magazine

      • Current Issue
      • Past Issues
      • Magazine Index
      • Subscribe
      • Online Archive
      • Author Guidelines

      All Access

      • Member Home
      • Start Free Trial
      • Gift Membership

      Online Learning

      • Courses
      • Project Guides
      • Reader Projects
      • Podcast

      More

      • FHB Ambassadors
      • FHB House
      • Customer Support

      Account

      • Log In
      • Join

      Newsletter

      Get home building tips, offers, and expert advice in your inbox

      Signing you up...

      This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
      See all newsletters
      See all newsletters

      Follow

      • X
      • YouTube
      • instagram
      • facebook
      • pinterest
      • Tiktok

      Join All Access

      Become a member and get instant access to thousands of videos, how-tos, tool reviews, and design features.

      Start Your Free Trial

      Subscribe

      FHB Magazine

      Start your subscription today and save up to 70%

      Subscribe

      We hope you’ve enjoyed your free articles. To keep reading, become a member today.

      Get complete site access to expert advice, how-to videos, Code Check, and more, plus the print magazine.

      Start your FREE trial

      Already a member? Log in

      Privacy Policy Update

      We use cookies, pixels, script and other tracking technologies to analyze and improve our service, to improve and personalize content, and for advertising to you. We also share information about your use of our site with third-party social media, advertising and analytics partners. You can view our Privacy Policy here and our Terms of Use here.

      Cookies

      Analytics

      These cookies help us track site metrics to improve our sites and provide a better user experience.

      Advertising/Social Media

      These cookies are used to serve advertisements aligned with your interests.

      Essential

      These cookies are required to provide basic functions like page navigation and access to secure areas of the website.

      Delete My Data

      Delete all cookies and associated data