If you have to patch a hardwood floor, you could remove the damaged floor board with a multi-tool, take a half hour in the process, and burn through a couple…

These custom-fit boxes are an affordable alternative to store bought trays if you need to organizing hardware, tools, and more.

If you need a custom shim that you have to cut to a very specific dimension, you could try to use a tape measure to measure the gap, but there's…

If you need to tack a piece of trim in place temporarily so you can remove it later, you could go get your hammer and an old-fashioned nail, and bang…

If you're using an oil-based product, like plumber's putty or glazing compound, you could just seal the lid tightly when you're done and hope that when you come back in…

If you need to cut a bunch of pieces to the same length on your miter saw, you could go out and spend a couple-hundred dollars on an elaborate miter-saw…

If you have a bunch of caulking to do, you could drag the caulk gun and a scrap of cardboard around with you and just wait for the caulk to…

You don't need to kick your empty drywall-compound bucket around the job site or flip it over by hand every time you want to sit on it. Make this handy…

If you need to drill a hole in some tile, you could chuck a masonry bit in your cordless drill and watch as the tip of the bit skates around…

If you don't want to strap on your nail bags while working around new kitchen cabinets for fear of scratching them, you could carry your tool belt by hand and…