Trimwork - Page 38 of 49

I've found that it's best to wait until stain-grade work has received its coat of stain and one coat of finish before filling the nail holes. If you fill the…

Every carpenter knows that it pays to have the painters in a position of feeling happily indebted to you. To that end, here's my tip. Whenever you are applying window…

Cutting a profile in the exposed ends of rafters and beams is a nice custom touch, but it can also be tedious and time-consuming. When a job came up cutting…

I read with interest the article Making Trim From MDF, by Jay Goldman. I, too, have been making moldings from MDF for a number of years, and I agree with…

A veteran builder and teacher shares tips that make it easier to do a great job installing beautiful trim.

Preassembling the jambs and the casings makes for a faster, more accurate job.

With stock moldings and simple milling, you can create a variety of baseboard designs, but they all require careful fitting.

Trim carpenters are inevitably faced with needing to measure accurately from the short point on a mitered piece of trim. Problem is, the tape measure's hook can't get a purchase…

To route some new wiring, I had to remove a lot of baseboards that were to be reinstalled after the new outlets were in place. The dilemma: how to pull…

This three-part system is fast to install, flexible in design and practically unaffected by changes in humidity.