Sheathing - Page 3 of 6

To ensure that self-adhered flashing tape seals properly, be sure to apply pressure at the time of install.

Construction continues on FHB House Nebraska as framer Mark Henrichson and his team lay AdvanTech subflooring and start to raise the walls.

Builder Ian Schwandt shares tips for laying out, fastening, and taping seams correctly when installing ZIP System roof sheathing.

Builder Ben Bogie introduces us to the science and benefits of wood-fiber insulation, plus he explains his installation process for the material on his latest construction project.

The Strong-Wall Site-Built Portal Frame System from Simpson allows framers to build their own portal frame to code in as little as 9-1⁄4 in. of wall width.

Builder Tony Blue finishes off the dry-in process by installing ZIP System Flashing Tape at the eaves.

Builder Tony Blue demonstrates how to seal roof ridges and plumbing-vent penetrations with ZIP System Flashing Tape.

Learn how to properly tape roof-to-wall transitions using ZIP System Flashing Tape on side walls, end walls, and inside and outside corners.

Learn how to apply ZIP System Flashing Tape to valleys on sheathing panels to ensure a tight, dried-in roof.

Builder Tony Blue demonstrates how to properly tape sheathing panel seams with ZIP System Flashing Tape.