*
Anyone ever build a Handy Home Products shed from HD?
Was the quality of the kit good?
They look like a good buy and, because the parts a pre cut, a big time saver. They seem very inexpensive when compared to other shed dealers in my area and I was wondering if they were inferior in any way.
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story

Listeners write in about ventilation and radon control and ask questions about tightening basement garages, ventilation solutions, and safer paint stripper.
Featured Video
Video: Build a Fireplace, Brick by BrickHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Fine Homebuilding Magazine
- Home Group
- Antique Trader
- Arts & Crafts Homes
- Bank Note Reporter
- Cabin Life
- Cuisine at Home
- Fine Gardening
- Fine Woodworking
- Green Building Advisor
- Garden Gate
- Horticulture
- Keep Craft Alive
- Log Home Living
- Military Trader/Vehicles
- Numismatic News
- Numismaster
- Old Cars Weekly
- Old House Journal
- Period Homes
- Popular Woodworking
- Script
- ShopNotes
- Sports Collectors Digest
- Threads
- Timber Home Living
- Traditional Building
- Woodsmith
- World Coin News
- Writer's Digest
Replies
*
Hey Tom,
Go around to jobsites and do some clean-ups. Then cobble together a shed. Call it "Offcut Shed."
But, aint seen HD's version!
Lastly, you get what you pay for.
Dan-O
*I recently built a Handy Home Products shed special ordered from the special ed people at Home Depot.The kit was suprisingly good. Went together pretty well and they do give you everything you need including nails. All you have to provide is roofing, paint, and primer for the trim. If I had to do it again I wouldn't buy the floor kit. It would be cheaper to buy the lumber and build your own. I think the floor kit was around $125 extra. They used 24"oc joists for the floor...I added a few for more strength. Just make sure your measurements are correct for the floor and you could save money on that. Over all I am satisfied....I just wanted something utilitarian with a big door opening....not just 48" wide.SJ
*yes i have built one (against my own will) and they do in fact suck. It was most difficult to build with such skimpy and inferior grade materials. It's basically the difference between building a modular home and a real home--1x2 framing or 2x4? 3/8 sheathing or 1/2"? There's definatly a difference.gabe
*Steve, thanks for the reply. I had the same idea about the floor - I intended to build it myself and make it stronger. I thought about building one from scratch (I have some plans from Hometime) but I thought the kit would be a timesaver. I only have about one day per weekend do do these kinds of things and winter will be here soon. I need the shed to be done before winter so I can get my cars back in the garage.Gabe, could it have been one of the lower line kits that you built (1x3 framing). The one I am looking at has 2x4 framing & 5/8" sheathing. I can't really see how I would build it any differently, but I am not a carpenter by trade.
*There are two lines one has the 2x3's and is alright I guess but the one I got was 2x4 framing and 5/8" sheathing. Seeing as how houses have been built with those materials I feel fine about my shed lasting 10-15 years. Plus it is easy to change or rebuild if need be.Do yourself a favor and do the floor on your own. We had it built in one day, will go much faster with a framing nailer though. The roofing took another half day or so.You should be able to knock it off in a weekend.SJ
*Thanks,I am going to order it as soon as the permit clears. I will build my own floor. I can't believe I need a permit for a garden shed!
*
Anyone ever build a Handy Home Products shed from HD?
Was the quality of the kit good?
They look like a good buy and, because the parts a pre cut, a big time saver. They seem very inexpensive when compared to other shed dealers in my area and I was wondering if they were inferior in any way.