Replies

1. 
   McMark | Mar 21, 2009 09:13pm | #1

   Round in plan, or round in section

2. 
   IMERC | Mar 21, 2009 09:18pm | #2

   top bearing bullnose router bit and a gude... cut from the top..

   or router table or shaper....

   round over bit and cut from the edge...

    

   Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming

   WOW!!! What a Ride!

   
   Forget the primal scream, just ROAR!!!

    

   "Some days it's just not worth chewing through the restraints"

1. 
   McMark | Mar 21, 2009 09:20pm | #3

   Why can't you just tool it in after the pour?  Thar is the way it is typically done

1. 
   renman | Mar 21, 2009 09:24pm | #5

   I need a round profile on the underside aswell

1. 
   IMERC | Mar 21, 2009 11:37pm | #11

   step out (box) at the top of the riser (form) and add yur shape... 

   Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming<!----><!----><!---->

   WOW!!! What a Ride!

   Forget the primal scream, just ROAR!!!

    

   "Some days it's just not worth chewing through the restraints"

1. 
   theslateman | Mar 21, 2009 11:38pm | #13

   Or the reverse of your intended shape

2. 
   IMERC | Mar 21, 2009 11:41pm | #14

   'zackly... 

   Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming<!----><!----><!---->

   WOW!!! What a Ride!

   Forget the primal scream, just ROAR!!!

    

   "Some days it's just not worth chewing through the restraints"

2. 
   IMERC | Mar 21, 2009 11:33pm | #10

   or incorperate it into the form.... 

   Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming<!----><!----><!---->

   WOW!!! What a Ride!

   Forget the primal scream, just ROAR!!!

    

   "Some days it's just not worth chewing through the restraints"

2. 
   renman | Mar 21, 2009 09:22pm | #4

   For concrete stair formwork?

1. 
   IMERC | Mar 21, 2009 11:32pm | #9

   was stuck in wood mode...

     

   Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming<!----><!----><!---->

   WOW!!! What a Ride!

   Forget the primal scream, just ROAR!!!

    

   "Some days it's just not worth chewing through the restraints"

3. 
   andybuildz | Mar 21, 2009 09:26pm | #6

   wondering if these guys have something for that http://www.fab-form.com/default.htm

    

    

    

   http://www.cliffordrenovations.com

   http://www.ramdass.org

    

4. 
   dovetail97128 | Mar 21, 2009 10:16pm | #7

   Any chance you could post a drawing of what you are trying to accomplish?

   Many ways to form/shape things, but without a clear picture of the project it is hard to help.

   They can't get your Goat if you don't tell them where it is hidden.
1. 
   renman | Mar 21, 2009 10:24pm | #8

   1.5" projection and 1.5" thick

5. 
   brownbagg | Mar 21, 2009 11:38pm | #12

   masonnite
6. 
   ponytl | Mar 22, 2009 02:05am | #15

   foam cut to shape that will line your form....  done all the time in concrete countertops for a bull nose edge.... they have rubber forms just like the stamps used to stamp concrete... but they cost... the hot wire cut foam is a one shot use...

   p

7. 
   bushman1000 | Mar 22, 2009 06:13pm | #16

   one method for making easy to remove keyways that would also work for making a poured shaped nosing would be to make the shape you want in styrofoam and incorperate it into the form

8. 
   artacoma | Mar 22, 2009 06:41pm | #17

   2 pieces of cove moulding tacked up in yer forms will do it in a pinch

   Rik

9. 
   dovetail97128 | Mar 22, 2009 07:16pm | #18

   Couple of ideas. I have used both.

   They can't get your Goat if you don't tell them where it is hidden.

   
1. 
   BoJangles | Mar 23, 2009 02:55am | #19

   That's a great idea!!