This photo illustrates a technique I devised to compensate for poorly installed ODE roof flashing. ALL fascia boards (rotten) were replaced with new, primed and painted boards. Each board received a kerf cut into which I slipped L-shaped metal. The top edge of this metal was slipped under the existing ODE (overhand drip edge…it should have been GA gutter apron…sigh). I caulked the kerf with Lexel brand glue-caulk, and applied a final coat of paint.
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Understand the difference between estimating and cost planning, and don't let your sweat equity evaporate into budgeting mistakes.
Featured Video
How to Install Exterior Window TrimHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.