Replies

1. 
   arcticcat | Aug 18, 2009 05:51am | #1

   I've got one - it's pretty handy.  I sharpened it up scary sharp when I got it and keep it in my hip pocket.  Use it quite a bit when I'm doing hardwood floors when I don't have my toolbelt on.

   Mike

2. 
   cliffy | Aug 18, 2009 07:01am | #2

   That fastcap booklet was in the JLC issue in my mail the other day. FOr 20 bucks the folding chisels look like they can't miss.  I'm going to order one, I hope it gets into Canada costing under 4o

   Have a good day

   Cliffy

1. 
   natedaw | Aug 18, 2009 03:00pm | #3

   If you're trying to avoid getting raped at the border, you might be able to order the chisels through Richleau.

1. 
   cliffy | Aug 18, 2009 09:04pm | #4

   Good idea, there is a Richlieu dealer 40kms away.

   Have a good day

   Cliffy

2. 
   Scott | Aug 18, 2009 10:26pm | #5

   Who's Richleau and how do they help with getting stuff over the border?Thx,Scott.

1. 
   gardenfrolicker | Aug 19, 2009 01:03am | #6

   They have a US and Canada presence.http://www.richelieu.com/produit/index.php?id=-1

1. 
   natedaw | Aug 19, 2009 01:32am | #7

   this should help you out. http://www.richelieu.com/statique/index.php?page=localisation#Vancouver

2. 
   dustinf | Aug 19, 2009 01:57am | #8

   You get anything you need over the border with 2 rolls of duct tape, and some lubricant.I learned how on the Internet.It's not too late, it's never too late.

3. 
   hammerelbow1 | Aug 19, 2009 01:38pm | #11

   I picked up Fastcap's 25' Storypole tape. Compared with my Stanley it's dead on. Inside measurments are right the first time. I'd reconmend it over the Stanley.

   Wayne

3. 
   jayzog | Aug 19, 2009 02:13am | #9

   Bought the whole set, but haven't used them much. Did 1 hardware install before I had a chance to sharpen them...they needed sharpening.  Now I got em nice and  sharp, havent used them yet, but I can tell in the sharpening process that they seem pretty soft steel. Add to that the short length , I don't think they will be the go to set for finish work.

4. 
   paulbny | Aug 19, 2009 05:23am | #10

   I've got a couple, they work well.  Get them from Grizzly on sale for $14.95 right now.

   Often in error but NEVER in doubt!