FS:  idrive Wall Mount garage door opener, for doors with existing torsion bar.

View Image

http://www.wayne-dalton.com/idrive_Torsion.asp

I purchased this system about a year ago.  Unfortunatly I did not realize that this could not be used with the low height door tracks (these have both the curved track for the door body, as well as a horizontal track that presses the top panel against the door frame).  Going with a conventional door track would have cut out too much height for me, so I had to go back to my original door opener.  I purchased it at Lowes awhile back, but never got around to returning it and can’t find the receipt. 

The system was fully installed, so there is grease already on the gears and the wires were already cut to length.  Also, the safety release cable (1/16″ steel cable) was cut to length.  Grease, 18ga two wire, and 1/16″ steel cable and fittings are all easily aquired at your local hardware store if the cut sizes are too short for you.  The batteries in the remotes are a year old as well, but they haven’t been used during that time.  All parts and instructions are repacked in the original box, each part rebagged with ziplock baggies.

Currently you can get these on eBay for about $215 with shipping.  I am selling mine here for $150, plus whatever your choice of shipping costs.  COD, Check (ship after it clears), or Paypal are acceptable payment methods.  If you are not happy with it, contact me within 7 days or receipt, ship it back to me and I will refund your purchase.