Replies

1. 
   Guest_ | Feb 04, 1999 10:17am | #1

   *
   If you're looking for a framer, IMO the Paslode can't be beat. An air gun is probably better for production work, but for remodeling and jobs where you don't want to drag around an air hose the "lobster" is great.

2. 
   John_Wells | Feb 04, 1999 12:32pm | #2

   *
   I've had the Paslode framing nailer for a number of years and I like it. Very portable. Look, Ma, no hoses! No compressor. No AC cords. Just stoke up the gun and go for it.

   The con would be that the cost/nail is slightly higher than with an air gun. If you frame daily, the air guns are cheaper to run. They also bounce-fire.

   I've heard from users of their trim nailer and they seem pleased with it.

1. 
   Rick_Agro | Feb 04, 1999 05:56pm | #3

   *I have had a Paslode impulse framing nailer for 6yrs, and haven't had any problems with it. That is if you don't count running out of fuel cells, or the batterys going dead. I have dropped it many times and it still keeps on, I use it mostly for remodeling but it has nailed quit a few sheets of plywood on new stuff. The only thing to remember is you have to keep it clean, not hard to do, but it will give you trouble if you don't. I also just purchased a Paslode impulse trim gun and just about retired my old trim nailers, no dragging air hoses over that nice hardwood floor, but thats another story. Rick

1. 
   JElmer | Feb 05, 1999 03:00am | #4

   *I have a TrimpulseII nailer and love it. The only drawback with and I'm sure the same holds true for the framing model is that it does not operate in the cold.(Below 25-30F)Depending on your area that may or may affect you.

3. 
   silver_hammer | Feb 05, 1999 03:00am | #5

   *
   It took a while to switch to air guns. I still prefer my 25 oz hart. However we are thinking of adding a fuel cell gun or two for those awkward ladder jobs. Ive read "reports" but what do the real field tests show are the pros and cons and brands to avoid?
   Thanks, Josh at Silver Hammer Construction