gut remodel of my own house. 1925 craftsman. oak flooring in kitchen is mostly destroyed due to previous water damage. Im thinking to replace entire kitchen with a diffferent species than oak. the “close but no cigar ” look of new oak and old oak just turns me off. If anyone has any pics to share where they have two different species meeting would be greatly appreciated.
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story

Old masonry may look tough, but the wrong mortar can destroy it—here's how to choose the right mix for lasting repairs.
Featured Video
SawStop's Portable Tablesaw is Bigger and Better Than BeforeHighlights
Fine Homebuilding Magazine
- Home Group
- Antique Trader
- Arts & Crafts Homes
- Bank Note Reporter
- Cabin Life
- Cuisine at Home
- Fine Gardening
- Fine Woodworking
- Green Building Advisor
- Garden Gate
- Horticulture
- Keep Craft Alive
- Log Home Living
- Military Trader/Vehicles
- Numismatic News
- Numismaster
- Old Cars Weekly
- Old House Journal
- Period Homes
- Popular Woodworking
- Script
- ShopNotes
- Sports Collectors Digest
- Threads
- Timber Home Living
- Traditional Building
- Woodsmith
- World Coin News
- Writer's Digest
Replies
here is some engineered bamboo (not right for a kitchen looking back)
and oak with water-based finish. the photo with less light was refinished 15 years ago, the one you can see with the blue rug was refinished a couple years ago, after many years under carpet.
oh yeah-thanks man! was the bamboo to soft? or why not right? looks good !
It is too soft. fine to walk on, but stuff gets dropped and the bamboo dents very easy.
The dents open the finish and the underlying bamboo gets discolored where the finish is disturbed.
On the positive side, it gives the kitchen a lived-in look.
Re-claimed old oak is a possibility. Patch what is damaged. or.. use the flooring that was under the cabinets (or perhaps from a closet or bathroom. Yes, my experience is that bathrooms had wood floors.) to repair the floor. Put the bamboo in the closet. Warning!! After lifting the floor boards, do not hammer the nails and then pull them out in the conventional fashion. Pull them through the wood as though they were being driven through it. This will avoid splitting the surface wood where the nail head was.