Replies

1. 
   Luka_ | Jan 17, 2001 10:54pm | #1

   *
   Go here and ask...

   http://forums.gardenweb.com/forums/tools/

1. 
   The_Tennis_Court_Builder_...on_t | Jan 18, 2001 12:28am | #2

   *I looked into hydraulic saws because I build docks and some cuts are quite deep in the water...I ended up buying an air powered saw(chainsaw #6)...It is very low power and needs lots of air volume...So then I now have to huge air compressers..The hydraulic saws are very expensive...get ear plugs and use the headsets too... I use a headset that has fm music for all my cutting tools...near the air stream,ajBy the by...my Sachs Dolmar will cut with the muffler buried in the lake and with a 36" bar...way down in the lake....So the air saw sees very little use...but is real handy.

1. 
   The_Tennis_Court_Builder_...on_t | Jan 18, 2001 07:11pm | #3

   *http://www.rgcproducts.com/otherhydro.html

2. 
   jim_l | Jan 18, 2001 07:11pm | #4

   *
   Anybody have a or have experience with hydraulic chainsaws? I hate listening to 2 stroke whine, including my own chainsaw. I have a tractor whose hydraulics I could tap into with a couple of quick disconnect couplers. Any info?
   Thanks, Jim