*
My home is 2×4 frame construction and is sided with what looks like 5/8 AC plywood ripped to 16″ then installed with a 12″ reveal. I am tearing this off and would like to insulate the stud cavities prior to resheathing and siding.
My question is this. Since I am working from the outside in, does it matter if the Kraft facing on the insulation is on the outside of the wall?
From building boxes and fitting face frames to installing doors and drawers, these techniques could be used for lots of cabinet projects.
Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.
Start Free Trial NowGet instant access to the latest developments in green building, research, and reports from the field.
Start Free Trial Now
Replies
*
My home is 2x4 frame construction and is sided with what looks like 5/8 AC plywood ripped to 16" then installed with a 12" reveal. I am tearing this off and would like to insulate the stud cavities prior to resheathing and siding.
My question is this. Since I am working from the outside in, does it matter if the Kraft facing on the insulation is on the outside of the wall?