New to me, at least: what are the two metal strips on the box for? Sorry for the blurriness in the photo.
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
This builder says there's nothing like an in-person event where you can learn from luminaries, talk with tool and material manufacturers, and network with your peers.
Featured Video
Video: Build a Fireplace, Brick by BrickHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
I tried waiting on the picture to download, but it's just too big for my dialup. What I could see was too blurry to make out.
Try getting in closer and taking the picture. Then downsize the thing so it doesn't take forever to download.
A: A translator.
O.K., scratch that last post. When the picture ws downloading, all I was was that box at the top left of the picture. Once it finished downloading I saw the box you were actually talking about.
I cropped and re-sized it and attached the revised picture to this post for those on dialups.
Sorry. I have am serving this from the desktop
and sometimes I forget about dialup.Thanks for cropping the photo. Since there have been no guesses, I will give
a hint. When I first encountered these boxes
at the store I thought the metal stips were
something to do with grounding, but actually
they turn out not to have an electrical
function at all.
nail guard?
Didn't know this was a quiz.I thought you were asking a question...
Even in the best and most peacefully civilized countries many occasions arise when a woman versed in the knowledge and use of firearms may find that information and skill of great importance. [Annie Oakley, Oct. 1919]
rotozip bit eater..the ele. got tired of the sheetrocker destroying his wires, so he invented a bit eater..I think it was Forlorn who made the first one.
Spheramid Enterprises Architectural Woodworks
" Let behind the eyes, that which one talks"
Rumi....
Are you serious about that--LOL!
sure thing.
Spheramid Enterprises Architectural Woodworks
" Let behind the eyes, that which one talks"
Rumi....
Do they add rigidity to the plastic boxes?
Pictures is very terrible, it looks like a piece of metal duct tape, put on to cover the screw holes so the taper wont fill them with mud. Why did they use such a shallow box?? boxes are cheap. The wires are not long enough (6" from box face) or stripped properly. Why is the device installed now? is this a remodel job??
I blame the picture on Canon's autofocus. I always
blame the tools!Why do they use such shallow boxes? I ask myself
the same question. Darned hard to use. About the
only thing on the market, though. I think it's
because they are often used in post and beam wall
infill cavities that are shallower than the normal
8.9 cm of stud walls (although this is a stud wall).Dunno about the craft standards of wire stripping
and so forth. I'm sure they follow whatever code there
is. The main thing is that the code does not stipulate
grounded circuits.The reason why this switch is installed, I think,
is that the owner is a DIY and he's working alone on
this for a good long time. A professional electrician
did the switch install, though. When they rock, they will cut an inch hole with an
augur so the switch can stick out, then rock over it,
same with the rest of the boxes.Here's my little photo essay about this photo and the
subsequent rocking. If you click on the 1st photo you can
see the comments that solve the mystery quiz (sorry
Boss for not labelling it as a quiz). You can click
down further and get high res photo if you want to see
details.http://www.dogshogun.com/gallery/album281The guys doing the work are part of a club that helps
people learn how to build their own houses, learn by
doing. They call it a Build It Yourself club. Each month
they get together on a Sunday and go over in a large
group and help some member with some aspect of their
project.They have some interesting tools and techniques.
Those strips are so you don't put a screw through the wire .
I haven't seen that type of box before. Because it is flush with the framing, there may be a clip on extension. Strange that the switch is connected but they probably do things differently in Japan than in the US.
Beat it to fit / Paint it to match