*
Anybody out there have anything good/bad to say about onelda dust collector systems?
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
This time-tested installation method for flangeless windows ensures smooth operation and provides air, water, and vapor control.
Featured Video
Highlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
*
I've got the 3hp blower in my shop.....it will suck the cat down the pipe if it gets too close !!
I ran mine down and under the concrete floor of the shop and blow the dust/chips in a pile out in the yard. When the pile gets big enough, I use the tractor front bucket to dispose of the chips.
*pretty good....we bought one for the rehab centre I'm involved with. We should have bought the next bigger one though; I thought it was going to be big enough, but we found it was heating up and tripping off with several machines on it. Took some machines off, or made sure only a certain number were running at a time, and it's better. So be conservative.Also, it just cam as a big whack of ducts, no assembly info besides a little CAD sketch that didn't tell you much about what they had in mind.But good quality equipment.