Besides using drapes, tarps and sheeting, is there a technique to minimize paint splatter when applying paint with a roller? Particularly when painting the ceiling.
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Skim-coating with joint compound covers texture, renews old drywall and plaster, and leaves smooth surfaces ready to paint.
Featured Video
Highlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Fine Homebuilding Magazine
Fine Home Building
Follow
-
Fine Homebuilding
Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.
Start Free Trial Now -
GBA Prime
Get instant access to the latest developments in green building, research, and reports from the field.
Start Free Trial Now
Replies
Some paints splatter more than others so choosing a low-splatter paint is important. However, there seems to be no correlation between paints that call themselves low-splatter and how much they actually splatter so trial and and error may be the only way to find out.
I've settled on Muresco by Benjamin unless the customer specifies something other than ceiling white. It seens to be a good compromise between price, coverage and relatively low-splatter.
Rolling slowly also reduces splatter, but you have to decide how slow is effective while still getting the job done.
The nature of the paint, the nature of the roller, and the nature of the painter are the big variables. Or you can install a splatter shield on the roller.