When I cut CCA, I used a sealer on all the cuts (don’t remeber the name).
What do you use to seal ACQ ect. when it is cut?
Thanks
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Listeners write in about Spark and wall-panel mounting and ask questions about flashing windows and long-lasting post-frame building.
Featured Video
Highlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Fine Homebuilding Magazine
Fine Home Building
Follow
-
Fine Homebuilding
Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.
Start Free Trial Now -
GBA Prime
Get instant access to the latest developments in green building, research, and reports from the field.
Start Free Trial Now
Replies
Greetings John,
This post, in response to your question, will bump the thread through the 'recent discussion' listing again.
Perhaps it will catch someones attention that can help you with advice.
Cheers
'Nemo me impune lacesset'
No one will provoke me with impunity
Thanks
John, this is what I use http://www.jasco-help.com/products/prod_wp.htm
John,
I use the Jasco brand of copper napthenate solution, just like the previous poster. It is more of a preservative than a sealer. By that I mean that its purpose is to render the wood unfit for munching by bugs or fungi. It is not primarily intended to exclude water, or to prepare for topcoating, as is usually implied by the term "sealer."
Bill