Need ideas on how to remove and replace this item. Don’t see any screws. Have installed vinyl planking before so have experience with floors just need some general ideas on how to do
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
To prevent moisture buildup and improve performance, install a continuous air barrier—such as drywall or specialized membranes—under tongue-and-groove boards or other interior wall paneling.
Highlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Fine Homebuilding Magazine
Fine Home Building
Follow
-
Fine Homebuilding
Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.
Start Free Trial Now -
GBA Prime
Get instant access to the latest developments in green building, research, and reports from the field.
Start Free Trial Now
Replies
From the pic (if I’m seeing correctly) it does not appear to be a transition piece, but is a door sill. If it is a sill, it can not be removed as it’s built into the door. You will have to install a transition to cover the gap for floating floor at the sill.
It is the wooden appearning strip. It does have one lip over the door sill but not for sure it part of the window sill per say?
It's part of the threshold, as stated. They're usually tall enough to accomadate a small quarter round or other transition piece. Is this why you're looking to remove it?