I have a few things that have been sitting around collection dust for to long, if anyone is interested in buying them send me a message.
New Bosch 1295DVS 5″ R.O. Sander SOLD
New Milwaukee 0375 CLose Quarters Drill $100
Slightly used, a handful of times but still in like new shape, Milwaukee 1676 1/2″ Holehawg Will come with pipe handle and cheap little red tool box as a case, Tool did not come with a case. SOLD
Slightly used Milwaukee 5368 rotary hammer, comes with case, still in like new shape but was replaced with a Hilti. $120
Crain 795 toe kick saw, used once, comes with case SOLD
Bostitch LHF 97125 Flooring stapler, used once on the same project as the toe kick saw. $175
Also have a PC 691 variable speed router, brand new, comes with 1/2″ collet no wrenches or case Sold
and a Cepco tools Bowrench for bending un willing deck boards straight. SOLD
That’s the mostly new stuff, I also have a:
Porter Cable 97549 top handle jig saw $50
and a porter cable 7 1/4″ blade right circ saw, the older model before they changed to the wrenches blade change SOLD
Edited 7/31/2005 7:36 pm ET by CAG
Edited 7/31/2005 7:58 pm ET by CAG
Edited 7/31/2005 8:21 pm ET by CAG
Edited 7/31/2005 8:22 pm ET by CAG
Edited 8/10/2005 3:35 pm ET by CAGIV
Replies
Wife putting the screws to you?
Expert since 10:00 a.m.
http://www.hay98.com/
ROAR!got me wondering what might cause the tool collector extrordinaire to begin to thin his stash?
A person with no sense of humor about themselves is fullashid
A rolling pin.
Expert since 10:00 a.m.
http://www.hay98.com/
I've had this stuff sitting around for a while, and it doesnt get used anywhere near enough, most of the stuff listed has been used once if at all, either clearance deals to good to pass up or bought it for a speacial purchase...
and this is hardly thinning the stash...it's not even a surface scratch.
Not to mention the few I already have more then 3 of....
Edited 7/31/2005 7:59 pm ET by CAG
Any prices to go with these?
Terry
sure are!
what are you interested in, make an offer
Milwaukee 1676 1/2" Holehawg
Crain 795 toe kick saw
PC 691 variable speed router
Probably not all, but at least some of them.
Terry
HoleHawg $260
ToeKick $200
Router $100
I'll give you a quarter for the hole hawg !
Are we there yet ?
send me a quarter, I'll put it in the mail ;)
Now THAT'S a deal !!!Glad to see I beat Terry to it !; )
Are we there yet ?
unhunh lol
"it's in the mail"
Oboy, I can hardly wait !!Once I plug it in and pull the trigger, that means I'm a real carpenter again, right ???If not, I ain't wasting the quarter, man...
Are we there yet ?
Ain't there a law against sending holes in the mail, Hog?
Welcome to the Taunton University of Knowledge FHB Campus at Breaktime. where ... Excellence is its own reward!
Nope, you misread, it's ho's
Ho, Ho, Ho, so you got hoes for sale too?;)
Welcome to the Taunton University of Knowledge FHB Campus at Breaktime. where ... Excellence is its own reward!
always wanted to be a pimp...
Not for sale you ninny.. For Rent!
Okay, I'll take all three.
Please e-mail me an address to send a check.
Shipping costs?
Terry
terry, I sent you an e-mail through here.
I received it and sent my address in reply.
Terry
Hi Niel,
I'll take the RO sander and the Bowrench off your hands. Send me an email too!
Porter Cable 97549 top handle jig saw
Still available...condition? Paypal?
It is still available in good working condition.
I haven't used or seen it in quite some time, the baseplate was bent at one time and I bent it back instead of replacing, just to warn you.
Also to be sure, do you realize this is the PC that the base does not bevel on, it's fixed at 90 degrees
Send me an e-mail through here if you're interested with your address and I'll let you know what shipping would be., e-mail is [email protected]
Thanks Neil
I'd like "a porter cable 7 1/4" blade right circ saw, the older model before they changed to the wrenches blade change $40"
Shipping? Palpal?
I believe the saw is sold, if it is not, I'll send you an e-mail
Thanks