Anyone use one of these to haul their hand tools around?
They look like they would be terrific, but expensive — the largest size goes for $150!
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Listeners write in about HVAC company consolidation and stains from supply lines and ask questions about Larsen trusses and insulating stucco houses.
Featured Video
Highlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
I have had the midsize bag for quite a while and just got the new smaller model. They are very nice bags and do keep my tools organized and protected. I use the small one to keep most of my finish carpentry hand tools in.
I am still thinking about getting the larger one also.
Jim
Can you give me some idea of why these (the Veto's) are so much more expensive than comparable tool carriers, e.g those from CLC or Duluth Trading?
I would assume the higher cost is due to higher grade materials and a new, improved design. I found the other makes to be pretty flimsy (I haven't tried them all.)
My understanding is that they are no longer just sold online. You might want to go to their website to try to find out what stores now handle them so that you might get a chance to look at one before buying. Of course, you can always return it if you order it online.
Take care,
Jim
I have the original Roger came up with a few years ago. He's a great guy and has a great product line he keeps expanding. I know half dozen guys who have a Veto ProPack and swear by them. The cost is so high because Roger uses better quality materials that don't wear out. These are bags you'll be handing down to your grandchildren.
Of course, other systems are less and quite adequate depending on the tools you haul and abuse you put them through. I have no doubt you can tie a Veto full of tools to the back of your bumper and drag it to the next jobsite and it'll be in one piece. Others? remember Ntl. Lampoon's 'Vacation'?
MG
PS - I don't own stock in the company.
Have you seen/used the bigger version they came out with recently -- I think the model is XXL? It's hard to tell from the pics on their web site, but it looks more like a traditional tool box -- 2 sides (with pockets) with an open space down the middle, and long enough to keep a 2' level.
I saw one the other day -- the original XL model -- and it is certainly heavy duty material and very well made (pretty heavy too, even without tools).
If you don't own stock you might want to hold off buying; I'm guessing others will soon flood the market with cheap knock offs. In fact HD is selling one now (imprinted with their Husky brand) that looks like it was either copied or patterned after the XXL ($150) -- for $35.
Edited 11/5/2004 1:51 am ET by nikkiwood
I'm glad to see this topic on the board. I've been thinking about buying one. I currently use a large Duluth bag that fits inside a 5 gallon bucket. The "up side" of this is lots of pockets, which I use everyone and wish for more...the "down side" is the bucket is extremely heavy and the small handle makes it hard on the hands when carrying. Also, bucket is too large to fit inside my truck's tool box...I either carry it on the passenger seat of my F150 or else tie it off to the bed with a bungee cord. My truck has no bed cap, so I hate putting the tools out there.
Tools I generally carry in my Bucket Boss are the following:
3 different screwdrivers
3 sizes of nail sets
1 steel punch
1 small handled file/rasp
linesman pliers, needle-nose pliers, channel locks
extension cord adaptor, 3 way cord adapter, air chuck for tires
pencils, sharpie pens
wonder bar, finish nail pry bar, cats paw pry bar
plumb bob and string, blue chalkline, red chalkline
combination square, speed square, 50 FT tape reel, 25FT tape reel
6FT folding wooden ruler
2 wood chisels, 1 small cold chisel
pop rivet tool
vinyl siding tool punch, vinyl siding "Z" tool
drill index, small plastic (plano brand) tackle box that contains drill/driver bits
another plastic box that contains driver sockets
"T" bevel guage, torpedo level
aviation snips
Roll of duck tape
battery operated stud finder
set of allen wrenches
2 crescent wrenches
20 ounce rip hammer
Nippers
19 volt cordless drill
SOOO, can the Veto Pro pack easily carry the tools I just named? If so, then I'm interested.
Davo
Davo --
<<"SOOO, can the Veto Pro pack easily carry the tools I just named? If so, then I'm interested.">>
The medium sized XL model might (with the exception of the cordless drill) -- but the larger XXL for sure would. Question is whether it's worth a $150 to haul your hand tools around in style.
You might want to check out the new carrier HD is selling -- Husky brand, black/red canvas, configured like the XXL, all for $35. I have one, and like it a lot.
How do you normally haul your small power tools (circ saw, drills, etc.) to the site -- get 'em as you need them from the truck, bucket, or what?
Is this the Husky your talking about? Or do they have a new one with the zip up sides? If it's the one in the link then they are nothing alike.
http://homedepot98home.crossmediaservices.com/homedepot/default.aspx?action=browsepagedetail&storeid=2398342&rapid=77120&pagenumber=23&listingid=-2097755728&ref=%2fhomedepot%2fdefault.aspx%3faction%3dbrowsepagespread%26storeid%3d2398342%26rapid%3d77120%26pagenumber%3d22%26prvid%3dHD-041007-TOOLWho Dares Wins.
Yup -- that's the one. Yesterday I happened to notice they now have another version -- which looks pretty much like a straight rip off of the larger Veto Pro pac (XXL). The Veto is $150, and the HD version is $70.
BTW, here is a slick way to make those looooong links more manageable. On my machine, the long link makes the whole post very difficult to read, since the lines run outside the frame.
http://tinyurl.com/
If that's the Husky your talking about then it's not even close.Who Dares Wins.
You're right. It is about half the bag (Veto), but at a third the price.
I'm going to buy the Veto XL, but still keep the Husky for carrying cordless drills/accessories/bits, and long stuff like levels, saws, etc.
The HD bag is sturdy and nicely designed -- and the price is right.
heh heh Gunner's on the prowl for a new gig bag.
What's it going to be, shall I spring the bucks on quality or is the cheapo good enough?
Gunner, we pass this way only once. Spend the bucks and enjoy it.
You'll be looking at it everyday.
Not me brother man! I'm just trying to help young nik here not make a mistake by thinking they're the same. I've been lusting after a VETO for a while now. I know all about the quality.
Maybe Calvin can snag one for the next quitten time auction.Who Dares Wins.
It shocked me when I got to thinking about what I said earlier in 'You'll be looking at it everyday.' and it got me to thinking 'ya, that's true'.
So then I get to thinking about my buckets and their aprons and stuff. You know, they work but buckets suck.
So again I'm thinking 'every day' and end up wishing there was a place I could see one of the Veto Pro Pacs up close.
Then I trip intp HD and see that funky Husky thing which is a not. Might as well go grab one of the old wooden tool carriers I saw in the basement the other day. Roar!
Then I saw the $70 Rigid carrier. Well, ya know, they could work. Weren't bad but not perfect. Need more little pockets and never jived with zipper deals cause you always end up leaving them open anyhow.
But the Rigid doubles it up with velcro which is ok.
At $70 a piece a pair of them would take care of most of it all at the same price as the VetoPac. And you wouldn't be cryin' so much cause you wanted a new replacement when it gets soiled and dirty looking.
Check 'em out. I'm half sold.
I decided to spring for a Veto, and I spent part of this evening moving all my hand tools into the new bag -- the model XL, for a $120.I cleaned everything from a Husky bag (the $35 one from HD), and still had room to spare, even though it is way more compact than the Husky. For that kind of money, you'd expect the thing to be well made -- and it is. Head and shoulders above anything else I've seen -- CLC, Bucket Boss stuff, the HD Husky bags, etc. Only time will tell how it holds up, but it looks like something you would end up handing down to your kid.But what impressed me most was the careful thought that went into its design. There is a nice combination of smaller pockets for specific tools -- torpedo, channelock, etc -- and wider pockets that will hold two or three pliers, for instance. Each side is identically configured with pockets. There's a 2-3" kind of tray at the bottom of the bag on each side, which is just long enough to comfortably fit a hammer, Wonder bar. At first, I didn't see the logic of the zippered cover on each side. The bag has a slightly triangular shape (when looking at it from the end), and when the flaps are zippered up, it is really easy to carry -- no tools hitting the side of your leg, doorways. the handle is big and substantial, and they also provide a heavy duty shoulder strap. You really have to load this thing up with your tools to appreciate it. Now, I'll have to see how it works out on the job site tomorrow.
You've got me hot now. Who Dares Wins.
nik-
Any chance on a comparison to the $69 and change version Rigid makes and sells at homedespot?
Edited 11/18/2004 9:17 am ET by rez
rez,I walked by the $70 Ridgid (I wonder why some of them are branded Husky, and this one Ridgid?) tool carrier the other day and spent all of about 20 seconds looking at it. None of these bags are chintzy, and this one is closest to the Veto XXL version. I already have the cheaper Husky ($35), and thought I would keep it around to go along with the Veto XL which I just bought. I need a longer bag to accommodate cordless drills, 2 foot level, maybe a hand saw or two. However, after seeing the Veto XL and working with it for even a day, I have decided to forget the Husky/Ridgid bags, and order the larger Veto XXL. It is twice the cost of the Ridgid, but you really have to see/use these Veto bags to appreciate them. I think they are well worth the extra cost, given the quality of the materials they use and the thoughtfulness of the design. For me, it was a little like the difference between a Ford and a Ferrari. I can't afford a Ferrari, but I can afford the Veto.
Thaks for the info nik-
Was wondering if you could give me the total weight of your Veto XL after you have loaded it with your tools?
I can, but will have to do it tomorrow............I remember from the mfgr. specs the empty bag weighs about 8 lbs.
Thanks, got to thinking about the weight factor in a single bag.
Load that XXL up with metal and watch out.
'Bout anything will beat a bucket tho' regardless.
No question that when these veto bags get loaded up, they're heavy. But the handle/should strap helps. But mainly, when the flaps on either side are zippered shut, you won't have tools rubbing on your leg -- and you are able to carry the thing with your arm pretty much straight down, rather than held out 4-6" which is the case with a bucket (or the Husky HD bag). this makes a big difference.I will haul out my bathroom scale this weekend and give you a total weight with the tools I have loaded.
The $35 Husky bag didn't have it.
The Rigid $69 holds promise. Did you have a chance to check it out?
You're making a good point Nikkiwood about holding out that bucket 6 or 8". Folks like me with screeching back pains know that inches matter!
blueWarning! Be cautious when taking any framing advice from me. Although I have a lifetime of framing experience, all of it is considered bottom of the barrel by Gabe. I am not to be counted amongst the worst of the worst. If you want real framing information...don't listen to me..just ask Gabe!
rez, You asked about weight, so I took my old, creaky bathroom scale to the truck today, and weighed the Veto XL. It came in at about 35 lbs, fully loaded with the usual assortment of hand tools, plus 2 hammers, wonder bar, big pincer nail puller. Just about every pocket had something in it. The only thing I couldn't find a good place for was a pair of protective goggles I lug around with my tools.This ain't light to haul around, but like I said before, once you close both side flaps, the slightly triangular design makes it possible to carry it with your arm straight down. It may weigh a bit more than a Bucket Boss filled with the same tools, but it is a lot easier to carry. Just for grins, I weighed the $35 Husky -- which I am using for impact driver, drill, extra battery and charger (15.6 v. Pan), 2 ' level, drill bits, hand saws. This bag also came in at about 35 lbs, but it seemed like more, because it was more awkward to carry than the Veto.I'm still looking for a better way to get my power tools from van to job site.
Never got a look at the $69 Rigid bag aye?
Not much of an opinion after a 20 second looksee as I'm crusin down the isle. The HD bags are ok -- better than most. But after spending 20 secs looking at the smaller Veto, I was convinced the bigger XXL was worth the $$. So I pulled the trigger, and never spent the time to go back and give the Ridgid bag a second look.
reread the thread. Sorry for the repetetion. Duh.
Nearest Veto Pro Pac around hear is 70 miles.
Be a brainpicker
Did you see the one that looks similar but is designed to fit on the top of a stepladder?
Yea I saw that. Pretty cool.Who Dares Wins.
What?/!!!!! NO FRAMING SQUARE?!!!!
Blue
Ps Sheesh!Warning! Be cautious when taking any framing advice from me. Although I have a lifetime of framing experience, all of it is considered bottom of the barrel by Gabe. I am not to be counted amongst the worst of the worst. If you want real framing information...don't listen to me..just ask Gabe!
"...the bucket is extremely heavy and the small handle makes it hard on the hands when carrying..."
I got a couple of $5 rubber grips (by BucketBoss) to make those handles more comfy. And it worked! Huge difference; definitely worth it.
I'm still out in the 5 gallon bucket world, after poking out a couple of bucket boss liners I got a Klein, sometimes those pesky electricians know a couple of things. I use a rubber handle and sawed a couple of v- notches 90 degrees from the wire bales as a kind of saw stop. Mine will fit in my truck box but I'm too lazy to go outside to measure its height. Started putting tape on the blades of my pull saw and sheet rock saw too.
I have one (the XL model) and I think it's great. It is quite spendy but I've tried alsmost everything else and this is the only carrier I've had that comes close to being "it". Bucket Bosses tip, Gatemouth bags close down too small and don't have enough pockets, blah blah. I haven't seen the Husky bag at HD so I can't compare. But I will say that every single HO who sees it is impressed and they always comment on it. I know, that doesn't help carry the tools but it does help you stand out a bit, even if it's just a bit.
IMHO they are worth the $$.
i bought the med sized one when they first started out and i just sold it to buy the big one. it is soooo nice! the new "open" side is sweet. i have a cordless drill, extra batt, charger, drill index, PLS2, small dozuki saw, and coping saw nicely fitted. the "pocketed" side is paced with all sorts of stuff. the thing i like is that i can keep things like my beloved veritas block plane safe from other "evil" tools like files and the like. well worth the money if you need to tote tools around every day. top notch construction!
on a side note, has anyone looked at the add or card that ships with the bag? it has the most messed up assortmet of tools! like 6 nail sets, and a buch of other whacky duplicates...
Hello Dude.
Could you tell me please if the what the approximate sizes of the pockets? I noticed in the website phote that they have a pair of yellow snips with the points up, meaning that the handles are probably stuck into two different pockets. It would be nice if there were a row of 1/2" +- wide pockets, and a row of 2-3" wide pockets.
I change toolboxes/ bags/ buckets about every two years. I have yet to find the bag that will hold all of my long files and wrenches upright in a pocket. When they lay at the bottom of the bag, they get lost and it's too much work to dig through.
The best system I've ever used was a bucket boss that I cut the bottoms of the pockets out to accomodate the longer hand tools that I wanted instant access to. But there are as many drawbacks to the bucket as there are to an old fashioned metal toolbox.
I started to make a wooden tool box once. It was aborted before the hinge stage because it was starting to way a lot too much with only one tray in it. It was a good divided tray, like the old timers used to make.
I read a story once where a carpenter went to get a job and the boss asked to look at his toolbox. It was his application and his resume.
This is a good thread topic.
rg
"I read a story once where a carpenter went to get a job and the boss asked to look at his toolbox. It was his application and his resume."
I once worked for a GC that had really gone all out on a small tool box. Dovetails, nice combo of hardwoods, great design as I vagually recall.
He said it certainly helped him get certain real high end jobs and he only used it as bait for that! It was impractical for a traveling tool box.
Hey Blue! I thought they just asked a framing square question!
W
I have the veto pro pac original tool carrier and i bought mine at the JLC trades show right from the owner of Veto Pro pac and he sold it to me for 130.00 dollars. This bag is not made for cordless tools just all the small tools that usually clutter up your nail apron or tool box.You can pac these bags to the hilt and when you walk in to do an interior small repair on the second floor you will be glad you have that bag there by your side and you don`t have to run out to the truck for that small tool it`s right by your side.Now if your smart you`ll carry your Cordless in the other hand when you show up to fix someones problems. The guy that works with me has the same bag so he goes one way with his i go one way with mine and nobodys under stocked for small tools and by the way i ended up tieing the red neck band for the name tag from the JLC show on to the handle to let me and him know who`s bag is who`s.It would be wise to get a look at both bags because quality and cheapness never show up together, good luck either way!!!
I just bought a second pro pak .Holds all my hand tools about $1200 wort of chisels planes hammers pry bars cat paws nail sets pliers and and measuring devices clamps. Was about 60 individual items.
Reason I know all this is cause the first bag and its contents got ripped off.
When my Duluth long bag dies ,pockets are startin to tear now I'll get the longer model.
I haven't tied a Veto Pro Pac, although I have considered getting one. Right now I use aluminum equipment cases for the bulkier tools and a clear plastic box with a handle for the hand tools. As the bottom broke out of the box, I am now looking for a new toolbox.
Friend has a Posso T-Box 400, and I really like the concept behind it. 70 tools are mounted vertically on a plastic frame.
What I like about this is that the whole tool collection is visible at a glance, and if something is missing, you know it. Each tool has its own precise location and there is no "drilling down" to find a tool. The framework is covered with a plastic shroud that locks down for transport and storage.
Dunno if there is a US distributor for these. About $50 plus shipping There is also a junior version.
http://www.posso.fr/posso_ang/PRODUIT/rangement.asp?offset=72
View Image
Who makes that?Who Dares Wins.
I know this isn't the Veto Pak, but I got a 25 buck Irwin bag 3 months ago. It's got a bunch of pockets, but I still end up tossing a ton of loose junk in the center/bottom...still, only25 beans...two of em could handle everything, hmmm Don't worry, we can fix that later!
Apparenlty Posso.Here is one US source, but it looks like they only have the small one and the web site is screwed up besides.http://www.clorders.com/posso.htm
It's from the link that TalkingDog posted in post#41 of this thread. Ya, Posso.
be a bag
I bought the medium size bag a couple of years ago. It is really, really well made and well thought out, but it is also really heavy. I have a utility body on a work truck, so I really don't need the bag, but it is truly as nice as it looks at the website. There are so many pockets that you tend to overload the bag with stuff that you may never use. I keep this one either in the garage or in the truck - it never makes it onto the job. It makes a good repository for all of the tools that you end up putting into your pouches at different times - depending on the project, you go to the bag and load up what you need and then make sure that you empty your pouches back into it at the end of the day.
Having to open the two zippers on one side, not finding what you needed and then having to open the two zippers on the other side gets old sometimes - especially when your fingers are sore or cold or gloved. I rarely look for the stuff that I put in the small zipper side pockets.
I recently bought the HD Husky bag and like it. It is open and has lots of pockets and will always make it to the jobsite. I think I may buy another. They fit nicely in the truck bins and I've got one that is now dedicated to electrical tools. If I get the second one, I'll use it to load up the stuff I need for a project to keep me from walking back and forth to the truck - like a bucket boss but nicer. The Rigid bag is a failure and it is too expensive.
Even with all my complaining about the Veto concept, the bags are so nicely made that I may end up buying the XXL - sorry, got carried away.
Which Husky bag did you buy? I have the carpenter tool carrier like the old wood box but haven't seen a new bag. I agree that the ridgid bag ain't all they think it is.
I probably have the same one that you describe. Sort of like the old open carpenter tool box. It reminds me of a bucket boss thing, but short and rectangular.
I'm working on a kitchen right now and I just thought about how handy the Husky ladder tool box could be. There aren't any countertops left to put my tools on, but there is always a 4' ladder in the room. Hmmm...
Check out this site. I fing alot of cool stuff on this site. I'm thinking of ordering the masters series drill sergeant. I have top sider boxes and it might help with organization. http://www.duluthtrading.com
Do I have a virus or did Lowe's also buy out Duluth Trading Co.?
Did you ever take the plunge on the Veto stuff?As you will recall, I got the XL model, and liked it so much I ordered the larger XXL version. And now that I have seen it, I sent it back. For my purposes, the configuration just didn't work. As with their other bags, it is split in two, with one side devoted to pockets for hand tools, and the other side is just a tray of about 3-4" width. I wanted to be able to carry two cordless drills, an extra battery, the charger, a small hand saw, and a 24" level. All that stuff just wouldn't fit in the narrow tray, so I decided I am better off with the HD $35 bag. the latter will easily carry all that, and you can use the pockets for a bunch of drill bits, drivers, etc. But the Veto XL is still, I think, the best thing since sliced bread for hand tools.
For sure the Veto bags are the best, heavy but great. The only problem we have found is you can get more tools in them than you want to carry.
Well, the recommendations got a bit puzzling in the rigid and husky bags both got pro and con reviews. You're comment on the Veto XXL is interesting.
Personally I'm not laying out that kind of money without seeing something up close in hand so all is well. Bwaaa!
Actually, next time during the pilgrimage to the boxes I was going to reevaluate the $35 Husky bag and take another look at the $70 Rigid.
These buckets with pocketed aprons are just doable at best and I need a change so a purchase of some sort is in order.
I'll probably do a husky $35 now just cause for that money I can try it out and worse thing that'll happen is it'll end up being the secondary carrier for special project tools. Might end up with two of them.
Still gotta see the Veto XL upclose tho'. Somehow I look at tool carriers as consumables which doesn't rank capital outlay unless it's really a cat's meow.
no guts no glory
Edited 11/26/2004 10:16 pm ET by rez
I don't think you can really go wrong with the $35 Husky. I now have two, and will save the second to load up with task-specific tools. Depending on how hard you use them, it's my guess they are good for at least 3-4 years. If you check the Veto website (see first post), they will be able to tell you if there are any dealers in your area, so you can go for a looksee. Another alternative is to order one from Amazon; if you don't like it, they will even pay return shipping. But you gotta get it to a UPS store (or pay $5 for them to pick it up).I think it really helps if you can get one in your hands and load it up with the tools you want to carry. You'll be able to tell right away whether or not it will work for you.
Nearest dealer is 70 miles. If I'm ever in that area I'll go in check them out.
Hey, nikkiwood,
How come you never filled anything out in your profile? Roar!
be square
<<"How come you never filled anything out in your profile?">>I didn't think anybody would care until I got my post count up to 4-5000. : )
we care ... we care a lot... we care way much....
now fill out the profile...
Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming
WOW!!! What a Ride!
Went to the HomeTeacup today and bought that $35 bag.
Got it home and realized it's not going to hold what's needed very comfortably but will house the commons.
Going to check that VETO XL when I get the chance.
Still thinking about rigging up a two wheel dolly to hold a mess of aproned buckets.
be a bucketbe a bag
i thought the veto would be my last bag. but it was too heavy. i now use 2 of the irwin bags bucksnort billy mentioned. pockets are small med and lg. and hold nail sets to bostitch staplers. some can close. the center is open for bulkier items like knee pads or dust mask. i have to admit to feeling nostalgic for the veto. especially after checking this thread out. it is well made and holds a ton of stuff. ...help me...
paul.
I can't, I'm still floundering with buckets.
fanmail from a flounder?
Edited 11/28/2004 12:11 pm ET by rez
<<"help me...">>What kind of help would you like? : )
So what happened to your Veto bag?
i sold it to a fellow breaktimer thru the forum classified.
i hate to admit this rez, but as i picked up my irwins today and entered the house i'm working on ....
well, i thought of that veto and missed it.one of the other posters mentioned something along the lines of the bag presenting a professional image. it does that.
it looks good and feels right, keeps things organized and in one place. besides, the 2 irwins are just as heavy as the one veto.if i had it to do over...i have to post this before the wife walks thru and i get an "i told you so", bless her heart.
paul.
After the positive PR I've read here I have to go see one. Thanks
happy shopping.paul.
I just ordered the XL model through Amazon. Now all my questions will be answered.Who Dares Wins.
Oh yeah?
We'll see.
be a bwaaa!
I'm trying to get into "Quittin' Time" so I can bid on Dino's Fiat.
Lost the password.
be hating when that happens.
I am anxious to know how it works out for you. I've had my XL for about a month now, and the more I use it, the more I like it. I try to keep everything in the same place, and once you learn the scheme, it is really easy to find the tool you need in a hurry.Sure, it is is heavier than I would like, but it is compact and easy to carry -- which for me, completely offsets the weight problem. I am hoping they come out with a longer bag for cordless tools, 2' levels, drilling/fastening accessories, etc. I actually ordered the XXL version, but I just couldn't make it work, so I returned it. Do let us know what you think.
I'll let you know. I chose the free shipping option so it will be after Christmas before it shows up.Who Dares Wins.
Frickin frackin freezing rain! I got back in town today and decided to track my order to see how it was doing. This is what I got. So close yet so far. The UPS guy usualy shows up about 7:00 p.m. Looks like he was getting close then gave up. Oh well no use dying over a box.
Dec 22, 2004
06:34:00 PM
LOUISVILLE KY US
EMERGENCY CONDITIONS BEYOND UPS' CONTROL
Dec 22, 2004
03:46:00 AM
LOUISVILLE KY US
OUT FOR DELIVERY
Dec 21, 2004
09:22:00 PM
LOUISVILLE KY US
ARRIVAL SCAN
Dec 21, 2004
07:51:00 PM
LEXINGTON KY US
DEPARTURE SCAN
Dec 21, 2004
07:02:13 PM
Lexington KY USA
SHIPPED
Dec 21, 2004
04:33:35 PM
LEXINGTON KY US
ORIGIN SCAN
Dec 21, 2004
03:27:46 PM
US
BILLING INFORMATION RECEIVED
Who Dares Wins.
Edited 12/22/2004 9:34 pm ET by Gunner
"EMERGENCY CONDITIONS BEYOND UPS' CONTROL"But they did not define the "emergency".What happend was the driver say the name of the shipper on the label and he needed a new tool case.I was starting out in the morning for LOU, but with weather I am going to wait another day.South Ind already has 10-12" of snow and I figure more over night.
It's been freezing rain all afternoon. Tonight snow and wind are supposed to move in. It's pretty nasty.
Got time to hook up while your in town?Who Dares Wins.
"Got time to hook up while your in town?"I don't know.I am not sure what I am doing now. I was coming tomorrow, but now waiting a day. If it is still bad Friday I am canceling altogether.And I will be coming back tuesday or wensday.email me your phone number.Dave Richardson mentioned the samething. But he said that he is on snow call for LG&E.
Tommorow is supposed to be the last of the real bad stuff. Numbers on the way. The wifes out of town untill Monday so I've got an open schedule.Who Dares Wins.
Alright got the bag and loaded it up. I haven't used it a lot yet, but so far it seems like just what I was looking for. You have to put everything back up to make it work so that's a good thing. It's bigger then I thought it would, be and that's a good thing.
I took some pictures of the way I have it set up now. This won't be the last configuration I'm sure. But I'm gonna mess with the lay out until I get something that's comfortable for me. I was even able to load up my new compact Panasonic. This way I can walk in and get right to work instead of making trips or packing two hands full of tools. I always use a drill so It has a need to be there. One thing I'm probably going to change right away is taking out the Bosch screw tip case. It takes up alot of room for the few tips I'll actualy wind up using. I picked it up at lowes today on sale so I thought I would put it in there to see how it fits.Who Dares Wins.
It looks like you're well on your way to a workable configuration. For my Veto, I set up one side with the tools I use most frequently, with the other side devoted to everything else (e.g. a folding Shark cats paw, etc.).There is a learning curve, but I have tried really hard to keep the same tool in the same pocket, which helps me find what I need more efficiently. I also favor multi-use tools -- such as the Klein 10 in 1 screwdriver, a set of 1/4" sockets in a molded sleeve with a single nut driver. In my case I have not found a way to avoid a second bag -- which is one of those $35 Home Depot items. Here I carry a cordless drill, impact driver, extra battery, charger, all my drilling, driving, and fastening accessories -- but it will also accommodate a 2' level, a couple of hand saws, and any other tools specific to a given job. I wish the Veto people would come up with a bag that I could use for these tools.But as far as the XL is concerned, the more I use it the more I like it.
I think my biggest challenge is going to be avoiding putting stuff I don't need in it just because I have the room.
That and keeping tool less helpers out of it. I'm gonna put all my junk tools in another bag and call it my Bob the builder bag. They can use that one if they need tools.Who Dares Wins.
I don't know what the Bosch bit kit is like.But Dewalt has this case with adjustable dividers that is handy for screw driver bits. You can also put in commonly used drill bits and other some accesories.I got my at HD.Could not find it listed on Dewalts web site, but here is is show as part of a kit.http://www.dewalt.com/us/products/accessory_detail.asp?productID=3047Ok I looked at that picture and got the name and then did a google on itHere it is http://tools.gillroys.com/Power_tools/Jig_saw_and_coping_saw_blades/Storage_Case-s302595.html
This is a set with a wide assortment of screw tips flat to square, and all different sizes.Who Dares Wins.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=4349762402&category=42362Who Dares Wins.
So, are you selling the bag you bought a while back?
Heck no. I just happened to stumble across one on Ebay, and thought someone might be interested.Who Dares Wins.
So his total cost was $83 and he could have amazoned new for $99 to the door.
Ya know, that wouldn't be worth the risk and hassle for $16.
And it's used.
That's where people mess up on Ebay, they just assume it's a good deal because it's on EBAY. Who Dares Wins.