Alright, who’s got the best designs for the imfamous waterproof deck scenario? I’m in snow country and the typical technique is decking over sleepers (which are floating in mastic) over waterproof membrane (sometimes torch down roofing) over plywood over joists (ripped to 1/4:12 slope).
This seems too crude and unreliable. Any commercial applications that would works well here? Any suggestions would help. Thanks.
Getting the details right for a wall assembly with the control layers to the exterior and lots of drying potential.
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.
Start Free Trial NowGet instant access to the latest developments in green building, research, and reports from the field.
Start Free Trial Now
Replies
Greetings j, As a first time poster Welcome to Breaktime.
This post, in response to your question, will bump the thread through the 'recent discussion' listing again.
Perhaps it will catch someones attention that can help you with advice.
http://www.buildingscience.com/resources/resources.htm
is another site that may have what you need.
Cheers
'Nemo me impune lacesset'
No one will provoke me with impunity
Edited 4/1/2006 2:35 pm ET by razzman
www.sealoflex.com
It will work fine - talk to them!
Forrest
bump
'Nemo me impune lacesset'No one will provoke me with impunity