I will be removing a set of double exterior doors and reinstalling them in a new house. Homeowner has ask if the doors can be refinish or refreshed, the doors are over forty years old,cover by a porch,it appears that no finish was applied to the doors. these doors are custom made 3 1/2in thick with 1×12 planks over a frame. There is some discoloring and worn places as well as cracks homeowner wants to keep to the cracked boards. I thought about replacing the outer skin with some boards that will be removed the the old house that is in good shape. Also the doors has a lot of little stars made of metal and screwed on. Thank you for your suggestions and help terry
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Key proposals for the next edition of the International Residential Code tackle room sizes, stair specs, emergency egress, and deck guards, among other requirements.
Featured Video
Highlights
Fine Homebuilding Magazine
Fine Home Building
Follow
-
Fine Homebuilding
Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.
Start Free Trial Now -
GBA Prime
Get instant access to the latest developments in green building, research, and reports from the field.
Start Free Trial Now
- Home Group
- Antique Trader
- Arts & Crafts Homes
- Bank Note Reporter
- Cabin Life
- Cuisine at Home
- Fine Gardening
- Fine Woodworking
- Green Building Advisor
- Garden Gate
- Horticulture
- Keep Craft Alive
- Log Home Living
- Military Trader/Vehicles
- Numismatic News
- Numismaster
- Old Cars Weekly
- Old House Journal
- Period Homes
- Popular Woodworking
- Script
- ShopNotes
- Sports Collectors Digest
- Threads
- Timber Home Living
- Traditional Building
- Woodsmith
- World Coin News
- Writer's Digest
Replies
nothing does exterior wr cedar better than sikkiens, remove the hardware and sand 'er down ..
A few months back FWW did a article on a test of several finishes for outdoor use. They finished several types of wood and left them for a year in varying parts of the country. Might want to check that out.
You might look to some of the log home finish products. Sikkens had a two step system with one part that filled gaps well and the other part that provided a more durable surface finish.
I'd sand down things until the worst areas look right, get the colors to even out with a thin stain or deck wash, cover with the sikkens.
LMAO.
Like yer tag line.
I always liked "if it wasn't for whiskey, the Irish would rule the world..."
thank you for your suggestions,I'll past them on to my boss.