Construction Techniques Archives - Page 2473 of 2487

January 29, 2002

* For wood siding, which is installed horizontally on a vertical wall, and the wall intersects a sloping roof : what is the recommended clearance between the angle cut ends…

January 29, 2002

* I have been asked to design an outdoor winding staircase for a current residential construction project. The owner would like to use masonry if possible for the sidewalls and…

January 29, 2002

* I am having a large carport added to my house. The builder has installed vinyl siding on the west facing gable end. He did not use any building paper…

January 29, 2002

* I have a granite top on a 24x48" cab with a 36" cooktop insert. Well, I snapped the granite right in two at the two thinnest sections. Can I…

January 29, 2002

* Last week I asked about repairing a granite countertop that I snapped in two at the thinnest sections. One reply said to use a two-part epoxy resin followed by…

January 28, 2002

* I've got a nasty job to do. I need to remove a drop-ceiling that is fabricated from 4x8 sheets on a 2x4 frame that has loose-blown cells over it.…

January 28, 2002

* I recently installed a door in an addition which is 10 years old. The existing hardware is oil rubbed bronze, which has had 10 years to patina. Any ideas…

January 28, 2002

* what is the best flashing detail where a flat, roof meets the brick 3'-4' parapet wall? how high up the brick should the roofing material extend; leave the brick…

January 28, 2002

* Seems like a simple issue yet I don't think I've seen a post for it and its always baffled me. I know there has to be a simple answer…

January 28, 2002

* can anyone tell how much sub floor I need under 3/4 in. pine flooring. I have 1/2 in. plywood on 16 in. centered floor joist toped with 5/8 in.…