Energy, Heating & Insulation Archives - Page 222 of 903

February 20, 2009

I have a two year old, Heil electric heat pump, fitted accurately at 4tons for my 2000 sf, two story home. Return vents and new ducts were installed as well.…

February 20, 2009

Inspired by the "cold showers for now on?" thread I got to thinking about mine and I think I've got the same heater and beginnings of the same problem.  Any…

February 19, 2009

I just installed a new Bryant furnace. I am offered a cash rebate from my energy - natural gas - supplier if I can furnish certain facts. One I cannot…

February 19, 2009

I have a 1950's ranch in northeast Ohio, it's small, about 1200 sq ft.  About eight years ago we replaced all the windows, rewired, replaced the furnace, and insulated the…

February 19, 2009

Just redid a part of a RH job in N. Mich as was wondering if anyone has seen these transfer plates.  The room was 264 sq.ft and had under 300'…

February 19, 2009

Ok Folks here goes , I'm a builder in Mass. and right now I'm helping a friend out with some siding to start with and now we are gutting the…

February 18, 2009

I have a water heater problem that has me scratching my head.  About a month ago, our hot water pressure dropped greatly at all of our outlets.  As you are…

February 18, 2009

On a mech. heating and or cooling thermo, inside the stat the adjustment lever for type of system being used, what does it do and what does the scale mean?…

February 18, 2009

Replacing a dishwasher that had 3/8" copper supply connected with compression fittings. A friend said that it's better to replace the copper supply with braided flexible hose with a shut-off…

February 17, 2009

We are getting ready to build a home in Kansas. We are using 2x6 on the exterior walls. We are looking at what would be the best insulation for us.…