Energy, Heating & Insulation Archives - Page 855 of 903

September 26, 2002

Can anyone advise me at what humidity level I should set my dehumidifier. Its a new home and it is in the basement. I first set it @45 and the…

September 25, 2002

I work for a builder, i.e., I'm given all of the things that fall through the cracks, and have been given the task of learning about sprayed-in cellulose insulation.  Currently,…

September 24, 2002

I'm looking for a ridge vent to install on my home. I'm only interested in the rigid designs so I can install a historic sheetmetal cap over it. Somewhere I…

September 24, 2002

I was wondering if anyone had an experiences with Statnet thermostats - used to be put out by enerzone -- looks like enerzone was bought by aprilaire. Thanks in advance.…

September 24, 2002

Where is a good place online to purchase code books. My area inspectors are using the 1996 International Mechanical &  1995 International Plumbing code books, both which I need. Already ordered the…

September 23, 2002

Hi... I'm looking for views regarding the use of finned copper tubing in an under-sub-floor application of radiant heating.  I've heard of the cost argument (ie copper too expensive) but what about…

September 21, 2002

I just purchased a house that had the roof redone about 6 months ago.  The owner went cheap and didn't install a ridge vent, and has the old pizza hat…

September 21, 2002

I would like some opinions on electric base board heat. I am remodeling my 1930's farm house and I can't figure out how to get the ducting for the forced…

September 21, 2002

Hi guys, I've been in the process of getting estimates for a new furnace. After several proposals, I've narrowed it down to a couple of guys. I know Trane is…

September 19, 2002

Option A - Leave A/C on day and night at constant temp. Option B - Leave A/C on while at home.  While at work, set thermostat 10-15 degrees warmer. What's…