General Discussion Archives - Page 102 of 6159

February 1, 2022

Just had company rep pitch his windows to me. I have researched wood and vinyl new construction windows for a couple of months and wanted to see one of the…

February 1, 2022

I’ve been trying to come up with a creative solution to repairing the bottom surface of the ~6×8 sill timbers on our 120yr old house at the sill/brick interface.  Also,…

February 1, 2022

Looking for a cheap jobsite alarm.  I really do not want anything elaborate, hooked to wifi or with a bunch of wires, etc.  Just maybe a motion alarm that buzzes…

January 30, 2022

I got a Sawbuck Frame and Trim saw a while ago. While changing the blade, I noticed that the saw blade screw is very short. It only has at most…

January 29, 2022

I've been hearing some rumbling about zip sheathing being better suited for southern than northern climates due to mositure build up in the winter months. Any thoughts on this

January 29, 2022

What to do you do when drywall is broken on a ceiling heat vent mounting area and there is no backing? Find a scrap of corner bead and using a…

January 29, 2022

Installing a System Cado wall unit with 3 sections in a new house. Picture 1 shows two of the sections in a previous house. Picture 2 shows the wall where…

January 28, 2022

Hi,How can I tell a "good enough" blade from one that must be replaced? I ask this because I have a 8" circular saw blade (Delta part no. 35-593) that…

January 28, 2022

Is there a way to connect with another member of forum 1 on 1? Clicked on member name, sent message but it went to public discussion. Maybe I need to…

January 28, 2022

Hi! I just purchased a historic home that has a large porch with a flat roof and that roof serves as the floor of the second floor porch/deck. The flat…