General Discussion Archives - Page 114 of 6159

November 17, 2021

Our floors have the finish worn right off where the grain is higher, it is under 5 years on a 25 year warranty that specifically states "we warrant to you…

November 17, 2021

Hi..Self building a utility building and I’m looking for a service to translate my floor plan to correct framing layout. Any suggestions?  I designed in homedesigner pro, but that framing…

November 16, 2021

Just put my first piece of rim board up (Weyerhaeuser 16" LSL) ....Now the error in my concrete and walls shows up ...On a 16 ft span (the total length…

November 16, 2021

How costly is it to correct flashing that was installed incorrectly around vents. 3 vents and 2 pipes. Ballpark number of hours.

November 16, 2021

Homeowner here, installed my first jamsill in a rush this weekend. Whenever I set the corners, I realized the sheathing sticks out past the concrete foundation edge. What that gave me…

November 15, 2021

So we're replacing our roof (shake, shingle, shingle) by taking it down to the firring strips and then sheathing the whole roof and shingles from there (and underlayment, etc., etc.)…

November 15, 2021

My wife and I are in the preconstruction phase of our house and we’re trying to finalize our exterior doors and windows and get them ordered so we won’t be…

November 14, 2021

I have a two story home, on the first floor theres a beam supporting the opening. Ill add a pic below. On the left side theres some weird ladder shelving…

November 14, 2021

I'm sanding taped joints and skim coats.  All purpose compound.  Picked up a radius 360 round sander with 220 grit.  Using that, I get lots of small scratches with brand…

November 14, 2021

Hi all,We have a contractor job in progress and I’d like an opinion please before they complete the job in the next 2-3 days.We are having supplemental jack posts and…