General Discussion Archives - Page 6125 of 6161

January 16, 1999

*

January 16, 1999

* Does anybody have a better deal than Home Depot on Perstorp's Pergo flooring? I need about 2500 square feet of the stuff. The Depot currently gets about $3.50 per…

January 16, 1999

* I was just reading about the use of pneumatic tools around the turn of the century, when were compressors, compressed air tools first used? And how about plywood, when…

January 16, 1999

* I'm going to help a friend re-do the finish on their kitchen cabinets. They are 35 year old birch veneer built ins in excellent condition except for a very…

January 16, 1999

* I'm working in a modular home where there are six 2x10's nailed together for the center beam. This is where the two halves of this modular came together in…

January 16, 1999

* I have been in the industry for over 21 years, I have run the gambit from employees, supervising, partnerships, lawyers,commercial work, and being screwed by General Contractors. I have…

January 16, 1999

* Blown in celulose has fallen out of popularity in my area. In the past, it was always installed in a "loose pac" fashion with no effort made to compress…

January 16, 1999

* Blown in celulose has fallen out of popularity in my area. In the past, it was always installed in a "loose pac" fashion with no effort made to compress…

January 15, 1999

* Thought I would ask for a little advice on framing nailers. I am presently using a Bostich nailer. Would like some advice on the purchase of another nailer. {…

January 15, 1999

* I found a source of 5" red oak flooring (shorts) to cover the plywood floor of my woodworking shop. The shop is in a fairly humid area (central NC)…