General Discussion Archives - Page 6126 of 6158

January 14, 1999

* I need some advice on selecting two gas furnaces for a new house. We'll have one furnace for downstairs and one for up. House is located in central Illinois.…

January 14, 1999

* Would appreciate any information on the preparation and installation of cultured stone from anyone thats familiar with it or has personal experience on the subject. Also if the preparation…

January 14, 1999

* Building an addition with a basement woodshop for general woodworking and architectural millwork. Need to install a shop dust removal/vac system. Would also like to install a whole-house vacuum…

January 14, 1999

* I've used Penofin for the last ten years, with excellent results. The redwood siding has developed a deep lasting finish with applications initially every year and now, every two…

January 14, 1999

* I read the postings about pex vs copper etc and noticed one that indicated pex was used in a freeze/thaw environment. My question is... Is pex rated as a…

January 14, 1999

* Jack Any time you have a hip or valley where one side is laid out from the opposite end of the wall,and the other starting at the corner where…

January 14, 1999

* Hi Ron, I have a Bostich stapler that has a 1/2" crown and shoots up to a 2" staple. I actually bought it because I has several hundred sq.…

January 14, 1999

* I am presently planning to replace my wood foundation. I am looking for advise on materials and methods that I should be looking into with my contractor. The pony…

January 13, 1999

* I'm up against this stuff they put in Capp homes years ago, which is radiant electric wires stapled to the ceiling drywall, then covered with mud or acoustic (acoustic…

January 13, 1999

* I need to know how to calculate the settings for my compund mitre saw for corners that are 120 degrees and 155 degrees.