General Discussion Archives - Page 6148 of 6158

December 28, 1998

* I am building some frame and panel doors using a reversible stile and rail router bit.I am very interested in set up hints.Do you cut the rails or stiles…

December 28, 1998

*

December 28, 1998

* We recently purchased a home that was built in 1978. We had planned on doing the typical updating, and replacing some doors and windows, and that has gone according…

December 28, 1998

* I have a slab-on-grade house, and under the dining room floor there is evidence of moisture. Not liquid, but damp concrete along the footing/slab seam, which has discolored the…

December 28, 1998

* what brands work best in a senco 250 finisher and a porta cable roofer

December 27, 1998

* I have to build a bridge to cross a small stream that runs over bedrock. The design that I have uses concrete wing walls to guide the stream under…

December 27, 1998

* I recently installed my first ceramic floor in my kitchen. After a couple of days,my wife noticed that the grout was stained. I think I spilled some grease or…

December 27, 1998

* I need to find a source for 8d nails in short lengths 1" or 1.5". Home Depot and Lowes have 2.5" 8d nails and I am having to cut…

December 27, 1998

* J., Your major problem working for this guy seems to be no coordinating authority ,which generally is a experienced Construction Supt, who shedules subs and material deliveries and stands…

December 27, 1998

* Bear, I ran mine through as close as possible to the ridge as to have the roof flange go under the ridge cap and avoid any leak or maintenance…