General Discussion Archives - Page 75 of 6159

September 8, 2022

Trying to save money where I can.Need 3" closed cell foam 2100sqftIs it worth it? Cost savings/hastle?

September 8, 2022

I'm a homeowner and we're building a poolside pavilion at our place, roughly 31'x12' that's enclosed with full height walls on the back and one side (bathroom&storage room on that…

September 7, 2022

Okay craftsmen, please help a lady out with some questions regarding laminate countertops.I really like the mitered fold look by Wilsonart, but....1. How well does it hold up?2. Will there…

September 7, 2022

Hi all,The 1:12 shed roof on my garage bump-out has gone rotten and needs to be replaced. The shed roof meets the garage such that the garage gable ends do…

September 6, 2022

I have a 26’x12’ patio with a solid roof covered balcony on top. The balcony has a solid roof over it. The balcony floor is composite flooring material so if…

September 6, 2022

Anyone know any suppliers that have any?

September 3, 2022

I had a contractor come over to talk about installing 2 egress windows in our basement. He mentioned the X drawn with pencil in the middle of each span of…

September 2, 2022

This post is apparently the latest one so I'm hoping for some current valid info.  Our dome is 37 years old and going strong.  However, it's time for a new…

September 2, 2022

Initially, we were going with exposed mahogany frames with no casing.  However, they're simply too expensive for this project.  Striving to upgrade the standard door, we started looking at EzyJamb,…

September 1, 2022

Or will I need to bite the bullet and purchase one?I have plenty of 6" bits and an 18"- 3/4" Nail eater bit if that makes a difference.