Tools for Home Building Archives - Page 31 of 791

March 29, 2011

I am sure this topic has been discussed before.  So feel free to repond to it directly here or refer me to the archives.  However, if referring me to a…

March 28, 2011

The Makita 9564CV angle grinder instructon manual warns us to use only the special (optional) wheel guard when using an abrasive cut-off wheel.  I contacted Makita's customer service department for…

March 28, 2011

I have about a five-foot-long log that I'd like to make into a floor lamp. Is there a tool that would drill a hole up the center of the log…

March 28, 2011

Any feedback on current models of belt sanders?

March 24, 2011

On pressure washers there's the " ON - OFF" switch for the ignition and another one for the fuel line - just a pet[JOBSITE WORD] valve.  So to run the…

March 24, 2011

I was just reading the artcle in the newest issue on the miter saw stand.  It caught my attention because I have been wanting to put together some type of…

March 3, 2011

I realize this is a simple 10" non-sliding miter saw but i just need a 90 degree chop saw for 2x4 and 2x6. Local store has it on sale for…

February 16, 2011

Anyone recommend a good Dado for the Bosch 4100. I am just a hobbiest and would like one that doesent require any modifications to get it to fit.

February 1, 2011

I've never used a coil siding nailer.  I've got a Dewalt coil roofing nailer.  Can i run siding nails through the roofer with out harming it? Thanks in advance, Mike

January 28, 2011

I'd like to put forth a scenario, and get your comments on both what power / shop tools you would get - and whether you'd be inclined to 'go for…