Build a Tool Shed Series: Install Architectural Shingles
Learn time-saving tricks for handling shingles on a steep roof as well as tips on reducing waste.
In this episode, Rick and Mac guide us through taking a roof from the initial sheathing through a simple flashing process, and then finished with a layer of architectural asphalt shingling. They cover the basics of asphalt shingling as well as helpful tips that can save you time and money such as how to re-purpose three-tab shingles as roof caps, or how to use shingles from a previous build as a starter strip. Roof shingling is yet another important step in the process of protecting your shed and one that should be taken seriously in order to avoid costly mistakes.
Videos in the Series
-
Introduction: How to Build a Simple but Sturdy Tool Shed
-
Build a Tool Shed Series: Install a Block Foundation
-
Shed Floor Framing Basics
-
Build a Tool Shed Series: Building a Gable-End Wall, Pt. 1
-
Build a Tool Shed Series: Building a Gable-End Wall, Pt. 2
-
Build a Tool Shed Series: Building the Bearing Walls
-
Build a Tool Shed Series: Build the Roof (Part 1)
-
Build a Tool Shed Series: Build the Roof (Part 2)
-
Installing Trim on a Simple Tool Shed
-
Build a Tool Shed Series: Installing Windows and Doors
-
Build a Tool Shed Series: Installing Lap and Shingle Siding
-
Build a Tool Shed Series: Install Architectural Shingles
-
Build a Tool Shed Series: Foundation System
-
Build a Tool Shed Series: Siding Options
-
Build a Tool Shed Series: Accessorize Your Shed
-
Build a Tool Shed Series: Shelving and Storage Options
-
Build a Tool Shed Series: Landscaping Completes the Look
-
Shortcuts to a Shed