Truing up walls can be especially tricky using even a plate-to-plate level. This makes using a laser plumb bob a lot easier. The 2″ offset from the front and sides allows the unit to be placed in a corner and both walls trued up. And the target can easily be seen by several people making truing up walls a task for a ‘team’. The red target reflects the laser dot and makes this very usable in even bright sunshine.
See my Habitat Tool Tip page for more: http://www.johnrlee.com/HabitatToolTips/HabitatToolTips.htm
-
Mount to a scrap piece using the 1/4 tripod bolt on the bottom of most levels. Place 2" from front and sides.
-
Target mouted on an aluminum paint roller extension pole with a 'universal' joint form a magnetic pick up stick.
-
Looks a little off!
