Most foundations are insulated on the exterior, and the vast majority of those exteriors are insulated with extruded polystyrene (XPS). While XPS is widely available, affordable, moisture resistant, and well insulating (R-5 per in.), it has a few drawbacks. Termites and carpenter ants tunnel through it with impunity, often using it as a protected channel into our homes; sunlight degrades it if it isn’t properly protected above grade; and polystyrene is highly flammable, necessitating the addition of the flame-retardant chemical hexabromocyclododecane (HBCD), which is under scrutiny in the European Union as a persistent, bioaccumulative toxin (also known as a PBT).

A relatively unknown alternative to XPS is rigid mineral wool. Mineral wool is made by melting basalt (an igneous rock) or iron-ore slag and spinning cotton-candy-like fibers held together by a phenolic binder. Because mineral wool is inherently fireproof, flame-retardant additives are not required. Rigid mineral wool insulates to between R-4 and R-4.3 per in. (lower than XPS, but still respectable), is about half the price of XPS, drains water quickly, has good compressive strength, is more resistant to insects than polystyrene, and is not as susceptible  to sunlight as XPS (though a protective coating is still needed).

So what’s the catch? The downside is that rigid mineral-wool foundation insulation is not yet widely stocked in the United States and requires special-ordering, which can increase costs and result in construction delays.

Available from these manufacturers:

• www.roxul.com (DrainBoard)
• www.iig-llc.com (MinWool)

Fine Homebuilding Recommended Products

Fine Homebuilding receives a commission for items purchased through links on this site, including Amazon Associates and other affiliate advertising programs.

Staple Gun

Although powered staplers are very popular, you still need a manual stapler on the job site. This staple gun from DEWALT® is reliable and easy to fire, reducing fatigue over prolonged use.

Buy at Amazon

Great Stuff Foam Cleaner

It’s important to clean and maintain a professional foam-dispensing gun, and this product fits the bill. It has a spray applicator for general cleaning, plus it screws onto the dispensing gun so you can clean the inside.

Buy at Amazon

Disposable Suit

This suit provides full body protection to help you stay clean from head to toe when installing insulation. We recommend wearing sweats underneath for additional coverage.

Buy at Amazon